Specification:
| Part Number | 1068379 |
| EMC: | According to EN 60947-5-2 |
| Sensing face material: | Plastic, VISTAL |
| F: | 48 mm |
| Housing material: | Plastic, VISTAL |
| Short-circuit protection: | + |
| Power consumption: | ≤ 20 mA |
| Power-up pulse protection: | + |
| Connection type: | Connector M8, 3-pin |
| Switching frequency: | ± 2,000 Hz |
| Supply voltage: | 10 V DC … 30 V DC |
| Temperature drift (of Sr): | ± 10 % |
| E: | 16 mm |
| Voltage drop: | ≤ 3 V |
| Reverse polarity protection: | + |
| Enclosure rating: | IP 67 IP 68 |
| Remark: | Associated graphic see «Installation» |
| D: | 24 mm |
| Ambient operating temperature: | -25 °C … +75 °C |
| Tightening torque, max.: | ≤ 1 Nm |
| C: | 12 mm |
| G: | 16 mm |
| Stainless steel (V2A, 304): | ± 0.7 |
| Output current Ia: | ≤ 200 mA |
| Note: | The values are reference values which may vary |
| Brass (Br): | ± 0.5 |
| A: | 10 mm |
| B: | 36 mm |
| Repeatability: | ≤ 2 % |
| Switching output: | PNP |
| Shock/vibration: | 30 g, 11 ms / 10 … 55 Hz, 1 mm |
| Output function: | NO |
| Assured sensing range Sa: | 4.86 mm |
| Design: | Rectangular |
| Copper (Cu): | ± 0.4 |
| Installation type: | Non-flush |
| Electrical wiring: | DC 3-wire |
| Aluminum (Al): | ± 0.5 |
| Sensing range Sn: | 6 mm |
| Ripple: | ≤ 10 % |
| Dimensions (W x H x D): | 12 mm x 26 mm x 40 mm |
| Hysteresis: | 5 % … 15 % |
| Time delay before availability: | ≤ 100 ms |
The product has a part number 1068379. Its sensing face material is Plastic, VISTAL, and the housing material is also Plastic, VISTAL. The device offers short-circuit protection, power-up pulse protection, and reverse polarity protection, indicated by a ‘+’. It consumes no more than 20 mA of power and has a power consumption of ≤ 20 mA. The connection type is a Connector M8 with 3 pins.
The switching frequency is ± 2,000 Hz. The supply voltage range is from 10 V DC to 30 V DC. Temperature drift of the sensing range (Sr) is ± 10 %. The voltage drop is ≤ 3 V. The enclosure rating is IP 67/IP 68.
The device dimensions are 12 mm x 26 mm x 40 mm (Width x Height x Depth). The sensing range (Sn) is 6 mm, with an assured sensing range (Sa) of 4.86 mm. The hysteresis is between 5% and 15%. The time delay before availability is ≤ 100 ms. The device has a rectangular design and is installed non-flush. It uses a DC 3-wire electrical wiring configuration.
Repeatability is ≤ 2 %. The switching output is PNP with a NO function. The device can withstand shock/vibration of 30 g, 11 ms / 10 … 55 Hz, 1 mm. The sensing range (Sn) is 6 mm. The ripple is ≤ 10 %.
For different metal targets, the sensing range varies: Stainless steel (V2A, 304) ± 0.7, Brass (Br) ± 0.5, Copper (Cu) ± 0.4, and Aluminum (Al) ± 0.5. The output current (Ia) is ≤ 200 mA. Ambient operating temperature is from -25 °C to +75 °C. The maximum tightening torque is ≤ 1 Nm.
⟦W281⟧
