Specification:
| Part Number | 1037438 |
| Maximum operating speed: | 9,000 /min |
| Working temperature range: | 0 °C … +85 °C |
| Permissible Load capacity of shaft: | 40 N (axial), 80 N (radial) |
| Resistance to shocks: | 50 g, 6 ms (according to EN 60068-2-27) |
| Code type: | Gray |
| Max. angular acceleration: | 500,000 rad/s? |
| Error limits: | ± 0.2 ° |
| MTTFd: mean time to dangerous failure: | 250 a (EN ISO 13849-1) |
| Reverse polarity protection: | 1 |
| Resistance to vibration: | 20 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Measuring step: | 0.09 ° 360 ° / number of steps |
| Max. number of revolutions: | 4,096 |
| SET (electronic adjustment): | H-active (L &;8801; 0 — 1,5 V, H &;8801; 2,0 — Us V) |
| Power consumption: | 0.5 W (without load) |
| Electrical interface: | SSI/Gray |
| Interface signals: | Clock +, Clock -, Data +, Data- |
| Operating voltage range: | 4.5 V DC … 32 V DC |
| Mass: | 0.26 kg |
| Repeat accuracy: | 0.002 ° |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Code sequence: | CW/CCW, parameter adjustable |
| Operating torque: | 0.3 Ncm (+20 °C) |
| Resolution power: | 4,096 x 4,096 |
| Moment of inertia of the rotor: | 6.2 gcm? |
| Max. number of steps per revolution: | 4,096 |
| Connection type: | Connector M23, 12-pin, radial |
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| Start up torque: | 0.5 Ncm (+20 °C) |
| Resolution: | 12 bit x 12 bit |
| Initialization time: | 50 ms |
| CW/CCW (counting sequence when turning): | L-active (L &;8801; 0 — 1,5 V, H &;8801; 2,0 — Us V) |
| Measuring step deviation: | ± 0.2 ° |
| Clock frequency: | 1 MHz |
| Mechanical interface: | Solid shaft, Servo flange |
| Shaft diameter: | 6 mm |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Bearing lifetime: | 3.0 x 10^9 revolutions |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
This device has a part number 1037438. The maximum operating speed is 9,000 revolutions per minute. The working temperature range is from 0 °C to +85 °C. The shaft has a permissible load capacity of 40 N axially and 80 N radially. The device can withstand shocks of 50 g for 6 ms, according to EN 60068-2-27.
The code type is Gray. The maximum angular acceleration is 500,000 rad/s². Error limits are ± 0.2 °. The MTTFd (mean time to dangerous failure) is 250 years, according to EN ISO 13849-1. It features reverse polarity protection (1).
The resistance to vibration is 20 g, from 10 Hz to 2,000 Hz, according to EN 60068-2-6. The measuring step is 0.09 ° (360 ° / number of steps). The maximum number of revolutions is 4,096. The SET function (electronic adjustment) is H-active (L ≤ 0 — 1.5 V, H ≥ 2.0 — Us V). Power consumption is 0.5 W without load.
The electrical interface is SSI/Gray. Interface signals include Clock +, Clock -, Data +, Data-. The operating voltage range is 4.5 V DC to 32 V DC. The mass is 0.26 kg. Repeat accuracy is 0.002 °. The storage temperature range is -40 °C to +100 °C, without packaging. The code sequence is CW/CCW and is parameter adjustable. Operating torque is 0.3 Ncm at +20 °C.
The resolution power is 4,096 x 4,096. The moment of inertia of the rotor is 6.2 gcm². The maximum number of steps per revolution is 4,096. The connection type is a Connector M23, 12-pin, radial. The enclosure rating is IP 65 on the shaft side and IP 67 on the housing side, according to IEC 60529. Start-up torque is 0.5 Ncm at +20 °C. The resolution is 12 bit x 12 bit. Initialization time is 50 ms. The CW/CCW counting sequence is L-active (L ≤ 0 — 1.5 V, H ≥ 2.0 — Us V). Measuring step deviation is ± 0.2 °. The clock frequency is 1 MHz. The mechanical interface is a Solid shaft with a Servo flange. The shaft diameter is 6 mm. Permissible relative humidity is 90% (condensation of the optical scanning is not permitted). Bearing lifetime is 3.0 x 10^9 revolutions. EMC compliance is according to EN 61000-6-2 and EN 61000-6-3.
The code type is Gray. The maximum angular acceleration is 500,000 rad/s². Error limits are ± 0.2 °. The MTTFd (mean time to dangerous failure) is 250 years, according to EN ISO 13849-1. It features reverse polarity protection (1).
The resistance to vibration is 20 g, from 10 Hz to 2,000 Hz, according to EN 60068-2-6. The measuring step is 0.09 ° (360 ° / number of steps). The maximum number of revolutions is 4,096. The SET function (electronic adjustment) is H-active (L ≤ 0 — 1.5 V, H ≥ 2.0 — Us V). Power consumption is 0.5 W without load.
The electrical interface is SSI/Gray. Interface signals include Clock +, Clock -, Data +, Data-. The operating voltage range is 4.5 V DC to 32 V DC. The mass is 0.26 kg. Repeat accuracy is 0.002 °. The storage temperature range is -40 °C to +100 °C, without packaging. The code sequence is CW/CCW and is parameter adjustable. Operating torque is 0.3 Ncm at +20 °C.
The resolution power is 4,096 x 4,096. The moment of inertia of the rotor is 6.2 gcm². The maximum number of steps per revolution is 4,096. The connection type is a Connector M23, 12-pin, radial. The enclosure rating is IP 65 on the shaft side and IP 67 on the housing side, according to IEC 60529. Start-up torque is 0.5 Ncm at +20 °C. The resolution is 12 bit x 12 bit. Initialization time is 50 ms. The CW/CCW counting sequence is L-active (L ≤ 0 — 1.5 V, H ≥ 2.0 — Us V). Measuring step deviation is ± 0.2 °. The clock frequency is 1 MHz. The mechanical interface is a Solid shaft with a Servo flange. The shaft diameter is 6 mm. Permissible relative humidity is 90% (condensation of the optical scanning is not permitted). Bearing lifetime is 3.0 x 10^9 revolutions. EMC compliance is according to EN 61000-6-2 and EN 61000-6-3.
