Specification:
| Part Number | 1059040 |
| Encoder profile: | V4.1 class3 |
| Operating torque: | 0.3 Ncm (+20 °C) |
| Reverse polarity protection: | 0 |
| Mechanical interface: | Solid shaft, Servo flange |
| Repeat accuracy: | ≤ 0.002 ° |
| Flange material: | Aluminum |
| EMC: | (according to EN 61000-6-2 and EN 61000-6-3) |
| Resistance to shocks: | 100 g, 6 ms (according to EN 60068-2-27) |
| Type of mounting shaft: | Solid shaft, servo flange |
| Max. number of revolutions: | 4,096 |
| Permissible Load capacity of shaft: | 40 N (axial), 80 N (radial) |
| Shaft material: | Stainless steel |
| Bus interface: | PROFINET IO/ RT Class B |
| Maximum operating speed: | 9,000 /min |
| Max. angular acceleration: | 500,000 rad/s? |
| Operating voltage range: | 10 V DC … 30 V DC |
| Storage temperature range: | -40 °C … +100 °C, without package |
| Resolution power: | 262,144 x 4,096 |
| Working temperature range: | -30 °C … +85 °C |
| MTTFd: mean time to dangerous failure: | 80 a (EN ISO 13849-1) |
| Resolution: | 18 bit x 12 bit |
| Enclosure rating: | IP 65 (according to IEC 60529), shaft side, IP 67 (according to IEC 60529), housing side |
| Endless operating functionality: | 1 |
| Measuring step deviation: | ± 0.002 ° |
| Start up torque: | 0.5 Ncm (+20 °C) |
| Error limits: | ≤ 0.03 ° |
| Bearing lifetime: | 3.0 x 10^9 revolutions |
| Max. number of steps per revolution: | 262,144 |
| RPI (requested packet interval): | 2 ms … 750 ms |
| DLR (Device Level Ring): | 0 |
| Initialization time: | 6 s |
| Electrical interface: | PROFINET |
| Permissible relative humidity: | 90 % (condensation of the optical scanning not permitted) |
| Data transmission rate (baud rate): | 10 Mbit/s / 100 Mbit/s |
| Mass: | 0.2 kg |
| Resistance to vibration: | 30 g, 10 Hz … 2,000 Hz (according to EN 60068-2-6) |
| Shaft diameter: | 6 mm |
| Connection type: | 3 x connector M12, 4-pin, axial |
| Moment of inertia of the rotor: | 6.2 gcm? |
