Forming,taping and strapping packaging station composed by a case former with a pushing cylinder and by a taping and strapping part. It is equipped with two adjustable lateral drive belts for the sliding of different box sizes. The Pack Former 50 SB is the right solution for forming,sealing and strapping American type boxes with the simultaneous application of adhesive tape on the top and bottom central line of the box. The result is the perfect alignment of the flaps and the optimum sealing thanks to the efficient taping head. After taping, the box slides to the strapping machine that automatically applies one or two parallel strappings. The distance between the strapping can be adjusted by regulating the fotocells that detact the box. TECHNICAL FEATURES Weight: 360 Kg Power supply: 220 volts 1ph – 50/60 Hz Environmental humidity conditions ≤ 90% Box transfer speed: 22 mt / min Air Supply: 4-6 kgf / cm2 Operating temperature range: from + 0 ° C to + 40 ° C Arch size: 650 x 500 mm Maximum strap tension: up to 45 Kg Strap size: 9 – 12 mm Thickness: 0,5 – 0,7 mm Maximum box weight: 40 kg Machine dimensions: L 2500 × W 1170 x H 1330 – 1450 mm Maximum Noise: 75 db Electtrical protection: IP 54 Adhesive Tape: Kraft, polypropylene, pvc Standard Taping head: 50 – 75 mm Working table height: 860
Технические характеристики
CharacteristicsOperational modesemi-automaticTechnologyadhesive tape, bottom sealerThroughput
Max.: 6 p/min
Min.: 4 p/min
