- high-precision worm gear drive with smoothed and tempered worm gear (self-locking)
- slideways of the dovetail guides made of low-friction compression-proof plastic sliding surface and hard-coated aluminium
- minimal «Sphere of Confusion» through specially fitted guide tracks optimised to each other
- use of stress-relieved, highly resilient materials guarantees high system stability and long life
- robust surfaces through highly tensile hard-coated aluminium
- two precision configurations
Modularly individually configurable:
- from basic model to high-end system
- to multi-axis systems
- with customer-specific hole pattern
Specifications:
Travel range [°]: | +/- 15 upper axis |
+/-13 lower axis | |
Material (base/slide): | Aluminium coated |
Gear ratio: | 720:1 |
Resolution [°]: | 0.0025 |
0.00005 minimum | |
Sphere of conf. total [µm]: | +/- 5 |
Max. load [N]: | 2000 |
Min. drive torque [Nm]: | 0.50 |
Weight [kg]: | 26 (without motor) |
Flange size [mm]: | 56 |
* step motor, 1000 steps/revolution
Precision configurations:
Rx-/Ry-Axis |  |  | ||
Accuracy [«]: | <= | +/- | 13 | on request |
Repeatability (unidir.)[«]: | <= | +/- | 2 | on request |
Reversal error [«]: | <= | 10 | on request |
Application specific versions:
- vacuum suitable
- antimagnetic
- radiation restistant
Maximum load:
A general statement of maximum load and torque capacities is not possible for eccentric forces due to the amount of different configurations.
However, our engineers will gladly calculate the maximum load capacity for your specific application.
Dimensions [mm]:
S: | A: | B: | C: |
270 | 250 | 250 | 135 |
Accessories:
Motors: | 2-/3-/5-Ph. |
Servo/DC | |
Hand wheels: | 0056 |
Gear boxes: | 2056.05 |
2056.10 | |
2056.20 | |
Limit switches: | included |
Zero-point control: | 9100 |
Encoder : | incremental |
absolute | |
Control system: | 9300 |
