In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the construction design, the use of bearing and shaft seals can be forfeited. All parts that are in contact with the medium are made solid of stainless steel (1.4581). Advantages of the TE Pump Series Application at high temperatures up to +150° C Absolutely dry run safe (no contact of mechanical parts) The highest chemical resistance Robust, thick-walled design, made of only two materials (no thin-walled deep-drawing sheet metal) Long-lasting and abrasion-free Design for the operation under demanding conditions Open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) No abrasion into the medium to be pumped (high purity applications) Easy to maintain Universally applicable, quiet and compact Available for standardized immersion depths The TE Pump Series is particularly suitable if containers or dipping baths cannot be flange connected to the side or if dry run in the plant cannot be excluded as well as for high temperatures.
Технические характеристики
CharacteristicsFluidfor seawater, for chemicalsOperationwith electric motorPrimingsemi-submersibleTechnologyimpellerDomainfor the food industryMaterialstainless steelProtection levelchemical-resistantOther characteristicscompact, dry, low-noise, with open impeller, verticalFlow
280 l/min (73.96817 us gal/min)
Head
23 m (7505)
Power
Min.: 0.18 kW (0.24 hp)
Max.: 2.2 kW (2.99 hp)
