High-carbon steel strip Annealed (+LC) THICKNESS TOLERANCES: According to the EN 10140:2006 Standard. Specified thickness tolerances for cold rolled strip and strip obtained strapping wide precision rolling w. WIDTH TOLERANCES: Width tolerances according to the EN 10140 Standard for nominal widths Other, closer dimensional tolerances are possible under a commercial agreement LENGTH TOLERANCES: According to the EN1040 Standard. Other tolerances are possible under a commercial agreement EDGE CAMBER TOLERANCES: Edge curve tolerances according to the EN 10140 Standard Other edge curve tolerances possible under a commercial agreement RIPPLE — LONGITUDINAL FLATNESS The flatness tolerance of the strips in cut lengths in the direction of rolling must be a maximum of 10 mm over 1000 mm. Any other flatness requirement must be agreed when placing the order. * The data contained in this catalogue are for information purposes only and are not under any circumstances, contractual supply conditions. Errors and omissions excepted.
Технические характеристики
CharacteristicsShaperibbonOther characteristicsannealed, high carboneThickness
Max.: 1,250 mm (49.213 in)
Min.: 3 mm (0.118 in)
Length
Max.: 2,500 mm (98.43 in)
Min.: 1,000 mm (39.37 in)
Width
Max.: 3 mm (0.12 in)
Min.: 0.1 mm (0 in)
Mechanical strength
580 MPa
