Bronze Strip CuSn6-R350 CuSn6-H080 CuSn6-R420 CuSn6-H125 CuSn6-R500 CuSn6-H160 CuSn6-R560 CuSn6-H180 CuSn6-R640 CuSn6-H200 CuSn6-R720 CuSn6-H220 FINISHES BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Type of coating: Electrolytic EN 14436 and Hot dip EN13148 * The data contained in this website are mere information and do not constitute, in any case, contractual conditions of supply. Except for error or omission.
Технические характеристики
CharacteristicsShaperibbonLength
5,000 mm (196.85 in)
Width
Min.: 0.05 mm (0 in)
Max.: 3 mm (0.12 in)
