Bronze Strip CuSn3Zn9-R430 CuSn3Zn9-H140 CuSn3Zn9-R510 CuSn3Zn9-H160 CuSn3Zn9-R580 CuSn3Zn9-H180 CuSn3Zn9-R660 CuSn3Zn9-H200 FINISHES BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Type of coating: Electrolytic EN 14436 and Hot dip EN13148 * The data contained in this website are mere information and do not constitute, in any case, contractual conditions of supply. Except for error or omission.
Технические характеристики
CharacteristicsShaperibbonLength
5,000 mm (196.85 in)
Width
Max.: 3 mm (0.12 in)
Min.: 0.05 mm (0 in)
