Регулятор массового расхода, 10 см3/мин, 0,25 дюйма, тип Swagelok, 0–5 В пост. тока, DB15, металлическое уплотнение Модель: GM50A013101SMM020

Технические характеристики

• Type Mass Flow Controller
• Calibration Gas N2 (or equivalent)
• Full Scale Flow Range 10 sccm
• Maximum Inlet Pressure 150 psig
• Normal Operating Pressure Differential 10 — 40 psid
• Proof Pressure 1000 psig
• Burst Pressure 1500 psig
• Fitting Type 0.25 in. Swagelok-style
• Control Range 0.2 — 10 sccm
• Flow Input Output Signal 0 — 5 VDC
• Connector Type 15-pin D-sub (tied grounds)
• Typical Accuracy ±1% of set point for 20 to 100% Full Scale, ± 0.2% of Full Scale for 2 to 20% Full Scale
• Repeatability ± 0.3% of Reading
• Resolution 0.1% of Full Scale
• Zero Temperature Coefficient

• Span Temperature Coefficient
• Inlet Pressure Coefficient
• Typical Settling Time
• Warm-up Time 30 minutes
• Operating Temperature Range 10 — 50°C
• Storage Humidity 0 — 95% Relative Humidity, non-condensing
• Storage Temperature Range -20 to 80°C
• External Leak Integrity -09 (scc/sec He)
• Leak Integrity Through Closed Valve Up to 10K valve
• Wetted Materials 316L S.S. VAR, 316 S.S., Elgiloy®, Nickel, KM45
• Seal Material Metal
• Surface Finish 10µ inch average Ra (electropolished)
• CE Certified Yes