Поставка оптоэлектронных компонентов ведущих мировых производителей

The M 900 / M 910 condenser mics have been developed for recordings of instrumental and vocal soloists in the professional market. The well balanced frequency response in the free field as well as in the diffuse field and the appropriate distinct characteristics ensure clean and colourless recordings of any sound sources with good selectivity. It is advisable to use the M 910 by soloists because it shows a specially optimised frequency response for this kind application. A distance of less than 8 to 12 inches, which is recommended as minimum distance between lips and mic, causes a coloration with an emphasis of lower frequencies, the proximity effect. An acoustic filter in the protective basket reduces the pop sensitivity. The direction of maximum sensitivity is axial, i.e. endwise to the mic. This fact and the ergonomic design make these mic the right choice for live performance of soloists. The transducer is equipped with a gold plated polyester membrane. The newly developed transformerless impedance transducer having a balanced output stage guarantees a high output capability and low intrinsic noise. Together with the good capsule qualities a higt brillance of the live performance is reached. A 10 dB attenuator is installed to reduce the sensitivity of the mic when placed near extremely loud sound sources. And a low frequency roll-off switch will reduce the proximity effect when close miking. At the lower end of the amplifier the mic is equipped with a 3-pin XLR connector fitting to the mic cable C 70. The mics use 48 volt phantom powering according to the international standards DIN 45596 and ICE 26815.

Технические характеристики

CharacteristicsApplicationsrecordingTechnologycapacitorPolar patterncardioidOther characteristicslow-frequency, with built-in preamplifier, with P48 phantom powering

M 900 M 910 Recording microphone M900 M910 capacitor cardioid low-frequency — товар из ассортимента Laserzz для подбора и поставки под задачи ремонта и комплектации.

Позиция подходит для сценариев замены и закупки под конкретную спецификацию оборудования.

Для корректного выбора сверяйте маркировку, параметры и совместимость с вашей схемой/узлом.

Вопросы и ответы

Как проверить совместимость товара?

Сравните артикул, технические параметры и формат исполнения с требованиями вашей модели оборудования.

Можно ли заказать партию?

Да, для партийных закупок доступны отдельные условия, ориентируйтесь на количество и сроки поставки.