Open meets professional needs that require large charging capacities in hot, poorly ventilated or tropical countries. It is equipped with 4 front filling connections for high pressure hoses, an intuitive control panel and an electric motor. The pumping unit, chosen from the 4 most powerful, is exposed in the rear part of the structure to ensure a better cooling cycle. For longer filter life, the Tornado high pressure dryer is recommended. Available as optional: the Presec system for filter saturation control or the SAM system for multigas analysis and remote charging panel. 4-stage high pressure pumping unit Monobloc in aluminum, Gooseneck in forged steel forced lubrication on the 4th stage cylinder by gear pump Oil filtration Aluminum connecting rods Main roller bearings Roller connecting rod bearings 1st, 2nd and 3rd stage cylinders in special cast iron 4th stage cylinder in special treated steel. Stainless steel intake and exhaust valves Interstage cooling pipes in stainless steel Separator after the 2nd, 3rd and 4th stage Safety valves after each stage Oil level sensor Prepared for Hyperfilter filter system Placed after the last compressor separator and before the pressure holding valve, the Hyperfilter purification system enables reliable treatment of the breathing air according to DIN EN 12021¹ when using original filter cartridges. The separator present between the 2nd and 3rd stage of the purification circuit allows to extract the greatest possible humidity. The filtering capacity with inlet air at 20 ° C and 200 bar is 4300 m³.
Технические характеристики
CharacteristicsTechnologypistonTypebreathing airPower sourceelectrically-poweredPortabilitystationaryTank volume
10 l (2.6 gal)
Pressure
Min.: 232 bar (3,364.88 psi)
Max.: 420 bar (6,091.58 psi)
Flow
27 m³/h, 33 m³/h, 39 m³/h, 45 m³/h (953.5 ft³/h)
Power
7.5 kW, 9 kW, 11 kW, 15 kW (10.2 hp)
