| Rotation direction signal | PNP digital output low: high impedance high; (VAUX — 2.5 V) in no-load operation |
| ID2 code | 7 |
| Altitude | 2000 m above MSL |
| Supply | from AS-Interface |
| Velocity signal | 0 … 10 V DC Control via parameter P1:0 |
| Number/Type | 2 outputs for DC roller motors (MOT1, MOT2) |
| Ambient temperature | -25 … 70 ?°C (-13 … 158 ?°F) |
| Data bits (function via AS-Interface) | inputoutput |
| Connection | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M8 round plug connector in accordance with EN 61076-2-104 Inputs: LF004-GS1-A (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM004-Gx1-A or similar Outputs: NF005-SS1-B (5-pin, bushing contacts, snap lock, B-coded). Matching connector: NM005-Sx1-B or similar |
| Current loading capacity | 100 mA , overload and short-circuit protected |
| LED ERR | Motor fault: 2 LED yellow |
| Profile | S-7.A.7 |
| Climatic conditions | For indoor use only |
| MTBF | 98 a |
| Degree of protection | EN 60529:2000 |
| Note | The flat cable routing is designed for 100 actuation cycles |
| LED IN | switching state (input); 2 LED yellow |
| Mounting | 2 clips with andempty; 8 mm drill hole |
| LED PWR | AS-Interface voltage; green LED green: voltage OK green flashing: address 0 or sensor supply overload or speed signal overload or external auxiliary voltage UAUX missing |
| AS-Interface | EN 62026-2:2013 |
| Current | 2 A , max. 5 A ( |
| Number/Type | 2 Inputs for 3-wire sensors (PNP), DC |
| Input | EN 61131-2:2007 |
| Signal delay | |
| Fieldbus standard | EN 62026-2:2013 |
| LED FUSE | Motor power supply; 2 green LEDs |
| IO code | 7 |
| ID1 code | 7 |
| Emitted interference | EN 61000-6-4:2007 |
| LED DIR | Motor rotation direction; yellow LED |
| Auxiliary voltage (output) | 18 … 30 VDC PELV |
| Storage temperature | -25 … 85 ?°C (-13 … 185 ?°F) |
| Slave type | A/B slave |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| Pollution degree | 2 |
| Rated operating current | 25 mA (without sensors) / max. 170 mA |
| Motor fault | NPN digital input 0 (no error) 125 andmicro;A 1 (error) 25 andmicro;A |
| Degree of protection | IP54 according to EN 60529 |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Mass | 310 g |
| ID code | A |
| AS-Interface specification | V3.0 |
| Relative humidity | 85 % non-condensing |
| LED MOT | Motor active; 2 yellow LEDs |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor supply or speed signal overload or external auxiliary voltage UAUX missing |
| Compatible roller motors | Interroll EC310, Rulmeca BL3 |
| Cable length | 1 m |
| Switching point | according to DIN EN 61131-2 0 (undamped) 0.5 mA 1 (damped) 2.0 mA |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| Overload protection | fuse , I2t = 53.7 A2s |
| UL File Number | E223772 «»For use in NFPA 79 Applications only»» |
| Vibration resistance | 0.35 mm / 2 g 10 … 1000 Hz |
| Input filter | 2 ms |
| Input current | 6 mA (internally limited) |
| Required master specification | V2.1 |
| Supply | from external auxiliary voltage UAUX |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions, 3 shocks |
Buy Pepperl+Fuchs VBA-4E4A-G20-ZEJ/M3L-P9 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. is a trusted industrial automation supplier. We offer a vast selection of products from renowned manufacturers. Worldwide delivery is available, ensuring you receive your order promptly. Competitive prices and exceptional service are our priorities. Experience the benefits of partnering with us for your automation needs.
