| IO code | 7 |
| Mounting | 2 clips with andempty; 8 mm drill hole |
| Supply | from external auxiliary voltage UAUX |
| Fieldbus standard | EN 62026-2:2013 |
| Degree of protection | IP54 according to EN 60529 |
| Note | The flat cable routing is designed for 100 actuation cycles |
| Rated operating current | 35 mA |
| Storage temperature | -25 … 85 ?°C (-13 … 185 ?°F) |
| Slave type | A/B slave |
| UL File Number | E223772 «»For use in NFPA 79 Applications only»» |
| LED OUT | Switching state (output); 3 LED yellow |
| AS-Interface | EN 62026-2:2013 |
| Required master specification | V2.1 |
| Data bits (function via AS-Interface) | inputoutput |
| Profile | S-7.A.E |
| Current loading capacity | 500 mA , overload and short-circuit protected |
| Signal delay | |
| Mass | 260 g |
| Number/Type | 3 electronic outputs, PNP, overload and short-circuit proof |
| AS-Interface specification | V3.0 |
| Emitted interference | EN 61000-6-4:2007 |
| Parameter bits (programmable via AS-i) | function |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| ID2 code | E |
| Voltage | (UAUX — 0.5 V) |
| Auxiliary voltage (output) | 20 … 30 V DC PELV |
| Input current | 8 mA (limited internally) |
| Input | EN 61131-2:2007 |
| Ambient temperature | -25 … 60 ?°C (-13 … 140 ?°F) |
| LED IN | switching state (input); 4 LED yellow |
| Switching point | according to DIN EN 61131-2 0 (undamped) 0.5 mA 1 (damped) 2.0 mA |
| Current | 2 A per output TB 40 ?°C: 6 A total TB 60 ?°C: OUT1+OUT2 max. 3 A, OUT3 max. 2 A |
| ID code | A |
| Cable length | 2 m |
| Connection | AS-Interface, AUX: Insulation piercing technology Yellow flat cable/black flat cable Inputs/outputs: M12 round plug connector in accordance with EN 61076-2-101 Inputs: LF type (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM type or similar Outputs: LF type (4-pin, bushing contacts, screw lock, A-coded) Matching connector: LM type or similar |
| MTBF | 110 a |
| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 or overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026-2:2013 |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| LED FAULT | error display; LED red red: communication error or address is 0 red flashing: overload of sensor power supply or overload of outputs or external auxiliary voltage UAUX missing |
| Degree of protection | EN 60529:2000 |
| Number/Type | 4 Inputs for 3-wire sensors (PNP), DC |
| Supply | from external auxiliary voltage UAUX |
| ID1 code | 7 |
Buy Pepperl+Fuchs VBA-4E3A-G20-ZEL/E2L-P5 with the best possible price and delivery terms on eltra-trade.com
Eltra Trade s.r.o. offers factory automation products. We can offer you specific products which are not available from other suppliers. We provide delivery to all continents. We can give you a quick response and very good prices. We always communicate openly with our clients. We provide a personal approach to each client.
