| LED PWR | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| AS-Interface | EN 62026-2:2013 |
| Pollution degree | 2 |
| LED IN | switching state (input); 4 LED yellow |
| Storage temperature | -25 … 85 ?°C (-13 … 185 ?°F) |
| Mounting | DIN mounting rail |
| Noise immunity | EN 61000-6-2:2005, EN 61326-1:2006, EN 62026:2013 |
| Rated insulation voltage | 92 V |
| Auxiliary voltage (input) | 12 … 30 V DC PELV |
| LED FAULT | Error display; red LED red: communication error, i.e. address is 0 red flashing: overload internal input supply, i.e. overload or lead interruption outputs |
| Functional safety | EN ISO 13849-1:2008 EN ISO 13849-2:2012 |
| Number/Type | 4 electronic outputs, PNP, overload and short-circuit proof |
| Current | 2 A Per output, total 4 A (TB 60 ?°C) 1 A Per output, total 4 A (TB 70 ?°C) |
| Connection | Removable push-in terminals rated connection capacity: rigid: 0.20 mm2 … 1.5 mm2 flexible (without wire end ferrule): 0.20 mm2 … 2.5 mm2 flexible (with wire end ferrule): 0.25 mm2 … 1.5 mm2 |
| Signal delay | |
| Voltage | 21 … 31 V DC (INT) |
| Pulse withstand voltage | 0.8 kV |
| ID2 code | E |
| MTBF | 141 a |
| Degree of protection | EN 60529:2000 |
| Data bits (function via AS-Interface) | inputoutput |
| Degree of protection | IP20 For safety applications: Installation in an enclosure with a minimum protection class of IP54 required |
| Supply | from AS-Interface (switch position INT, default settings) or external UEXT (switch position EXT) |
| LED AUX | ext. auxiliary voltage UAUX; dual LED green/red green: voltage OK red: reverse voltage |
| Input current | 5.6 mA (max.) |
| Input | EN 61131-2:2004 |
| Emitted interference | EN 61000-6-4:2007 |
| Parameter bits (programmable via AS-i) | function |
| Required master specification | V2.0 |
| Shock and impact resistance | 15 g, 11 ms in 6 spatial directions, 3 shocks 10 g, 16 ms in 6 spatial directions, 1000 shocks |
| Surge protection | UEXT, UAUX, Ue: overvoltage category II, safe isolated power supplies (PELV) Overvoltage category of the power supplies (primary): III |
| Profile | S-7.0 |
| Protection class | III |
| Auxiliary voltage (output) | 20 … 30 V DC PELV |
| Number/Type | 4 inputs for 3-wire sensors (PNP), DC |
| Supply | from external auxiliary voltage UAUX |
| Mass | 110 g |
| Fieldbus standard | EN 62026-2:2013 |
| ID1 code | F |
| Rated operating current | 35 mA (without sensors) / max. 190 mA |
| Climatic conditions | For indoor use only |
| Switching point | according to DIN EN 61131-2 (type 1) |
| LED INT | Internal input supply active; LED green |
| Voltage | (UAUX — 0.5 V) |
| Current loading capacity | 150 mA, overload- and short-circuit protected (INT) |
| ID code | 0 |
| Relative humidity | 85 % , noncondensing |
| Slave type | Standard slave |
| UL File Number | E223772 |
| LED OUT | switching state (output); 4 LED yellow/red yellow: output active red: output overload or lead interruption |
| Vibration resistance | 0.35 mm 10 … 57 Hz , 5 g 57 … 150 Hz, 20 cycles |
| Usage category | DC-13 |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface |
| Ambient temperature | -25 … 70 ?°C (-13 … 158 ?°F) |
| Altitude | 2000 m above MSL |
| IO code | 7 |
| Electrical safety | IEC 61140:2009 |
| AS-Interface specification | V3.0 |
Buy Pepperl+Fuchs VAA-4E4A-KE5-ZEJQ/E2L with the best possible price and delivery terms on eltra-trade.com
Discover a wide range of industrial electrical products at eltra-trade.com. We specialize in finding any part you need and providing prompt delivery. Benefit from our premium quality products and competitive prices. Partner with us for your electrical supply needs and experience outstanding service.
