| UL approval | cULus Listed, Type 1 enclosure |
| AS-Interface | EN 62026-2:2013 |
| Parameter bits (programmable via AS-i) | function |
| Current | input current limited 15 mA, short-circuit protected |
| Number/Type | 2 safety-related inputs for mechanical contacts, crossed-circuit monitored: 2 single-channel contacts: up to category 2/PL c to ISO 13849-1 or 1 2-channel contact: up to category 4/PL e to ISO 13849-1 |
| Pulse withstand voltage | 0.8 kV |
| UL File Number | E223772 «»For use in NFPA 79 Applications only»» |
| ID code | B |
| Mass | 200 g |
| Surge protection | overvoltage category III |
| Degree of protection | IP67 This protection class is achieved by using the AS-Interface flat cable VAZ-FK-S-YE |
| Profile | S-7.B |
| Rated insulation voltage | 32 V |
| Rated operating voltage | 26.5 … 31.6 V from AS-Interface (PELV) |
| Slave type | Safety-Slave |
| ID1 code | F |
| Number/Type | 1 conventional electronic output, PNP |
| Relative humidity | |
| Voltage | 20 … 30 V DC pulsed |
| Contact elements | spring-loaded contact socket |
| Degree of protection | EN 60529:2000 |
| Connection | AS-Interface: AS-Interface flat cable Inputs/outputs: M12 x 1 socket, 8-pin |
| LED OUT | Switching state (output); LED yellow |
| Data bits (function via AS-Interface) | inputoutput |
| Shock and impact resistance | 30 g, 11 ms in 6 spatial directions 3 shocks 10 g, 16 ms in 6 spatial directions 1000 shocks |
| AS-Interface specification | V3.0 |
| Noise immunity | IEC 62026-2:2008 EN 62061:2005 EN 61000-6-2:2005 |
| Supply | from AS-Interface |
| Functional safety | EN ISO 13849-1:2008 + AC:2009 EN ISO 13849-2:2012 EN 62061:2005 |
| LED AS-i | AS-Interface voltage; green LED green: voltage OK flashing green: address 0 |
| Required master specification | V2.1 |
| Protection class | III |
| Voltage | (UASI — 7.0 V) UOUT UASI |
| Pollution degree | 3 |
| Current | 50 mA , short-circuit/overload protected |
| Rated operating current | 90 mA |
| Vibration resistance | 0.75 mm 10 … 57 Hz , 5 g 57 … 150 Hz, 20 cycles |
| Emitted interference | EN 61000-6-4:2007 |
| ID2 code | 0 |
| LED IN | switching state (input); 2 LED yellow |
| Altitude | 2000 m above MSL |
| Electrical safety | IEC 61140:2009 |
| Storage temperature | -25 … 80 ?°C (-13 … 176 ?°F) |
| Supply | from AS-Interface |
| Fieldbus standard | EN 62026-2:2013 |
| Tightening torque, cable gland | 0.4 Nm |
| Tightening torque, fastening screws | 1.65 Nm |
| Ambient temperature | -20 … 60 ?°C (-4 … 140 ?°F) |
| IO code | 7 |
| LED FLT | error display; LED red red: communication error or address is 0 |
Buy Pepperl+Fuchs VAA-2E1A-G10-SAJ/EA2J-2M-V1-G with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is an electrical supply store online. We provide an enhanced product catalog for our clients. Rush shipping is available to any country. We supply only certified products from European brands. We always strive to correspond with the delivery times. Our company has a very well-established supply chain so we always provide the equipment on time and without delay.
