| Ambient temperature | -35 … 60 В°C (-31 … 140 В°F) |
| PFHd | Depending on the protection field height; see Manual |
| Housing length L | see table 2 |
| Function indicator | Green: OSSD ON , Red: OSSD OFF |
| UL File Number | E215245 |
| Output type | Receiver unit OSSD |
| Input format | Break contact |
| Switching voltage | 24 V DC |
| UL approval | cULus Listed |
| Power consumption | Transmitter unit: 5 W Receiver: 15 W |
| Relative humidity | max. 95 %, not condensing |
| Protection field height | see Table 1, max. 2400 mm |
| Switching current | ON: max. 0.1 A; OFF: |
| Performance level (PL) | PL e |
| Storage temperature | -35 … 70 В°C (-31 … 158 В°F) |
| Switching voltage | 24 V DC |
| Response time | see Table 1, max. 17 ms |
| Input type | Receiver unit, start release |
| Connection | Transmitter unit: 4-pin, M12 x 1 connector Receiver: 8-pin, M12 x 1 connector Cable cross section min. 0.25 mm2 Max. cable length 50 m |
| Input current | 5 mA |
| Category | Cat. 4 |
| Input current | 5 mA |
| Output type | Receiver signal output start readiness |
| Degree of protection | IP67 , For indoor use only |
| Input type | Transmitter unit test |
| Light type | modulated infrared light , 850 nm |
| Input type | Receiver unit relay monitor |
| Protection class | III , IEC 61140 |
| Status indicator | Transmitter unit: LED yellow: Mode, test or error Receiver: LED yellow: Start readiness, function reserve or error |
| Ambient light limit | Not sensitive to ambient light in accordance with IEC 61496-2 |
| Optical resolution | 90 mm |
| Signal output | PNP-semiconductor, short-circuit protected, 0.1A |
| Input format | Break contact |
| CCC approval | CCC approval / marking not required for products rated 36 V |
| No-load supply current | Transmitter unit: 150 mA Receiver: 150 mA (without outputs) |
| Product standard | EN 61496-1 ; IEC 61496-2 |
| Supplementary information | EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com. |
| Angle of divergence | |
| Function | Beam Code A: open or 0 V Beam Code B: 24 V DC, 5 mA |
| Input current | 5 mA |
| Type | 4 |
| CE conformity | CE |
| Mission Time (TM) | 20 a |
| Switching voltage | ON: UB — 2 V; OFF: |
| Signal output | PNP semiconductor , monitored for short and cross circuits |
| Input type | Receiver unit, mode A/B (see transmitter unit, mode A/B) |
| Input format | Break contact |
| Operation indicator | green: Power on |
| Functional safety | ISO 13849-1 ; EN 61508 part1-4 |
| Effective detection range | 5 … 20 m |
| Mass | see table 2 |
| TГњV approval | TГњV |
| Light source | IRED |
| Input type | Transmitter unit, mode A/B |
| Operating voltage | 24 V DC (-20%, +30%) ; Power supply with safe isolation: 24 V DC |
| Safety Integrity Level (SIL) | SIL 3 |
| Operating mode | Startup/restart disable, deactivateable |
Buy Pepperl+Fuchs SLCS90-/35 with the best possible price and delivery terms on eltra-trade.com
You will find a lot of industrial electrical products on eltra-trade.com. We have the status of the official representative of many European brands. We deliver to any country in the world. Our company is not an official distributor of all brands, but we can offer you competitive prices for all items in our catalog. We provide accurate delivery time information at the very beginning. We are the partner who can trust.
