| General specifications | ||
| Switching element function | PNPNO | |
| Rated operating distance | 1.5 mm | |
| Installation | flush | |
| Output polarity | DC | |
| Nominal ratings | ||
| Operating voltage | 10 … 30 V DC | |
| Switching frequency | 0 … 600 Hz | |
| Hysteresis | typ. 5 % | |
| Reverse polarity protection | reverse polarity protected | |
| Short-circuit protection | pulsing | |
| Voltage drop | less than or equal to 2 V | |
| Operating current | 0 … 200 mA | |
| No-load supply current | less than or equal to 10 mA | |
| Limit data | ||
| Operating pressure | 500 bar (7252 psi) | |
| Functional safety related parameters | ||
| MTTFd | 728 a | |
| Mission Time (TM) | 20 a | |
| Diagnostic Coverage (DC) | 0 % | |
| Approvals and certificates | ||
| UL approval | cULus Listed, General Purpose | |
| CSA approval | cCSAus Listed, General Purpose | |
| CCC approval | CCC approval / marking not required for products rated less than or equal to 36 V | |
| Ambient conditions | ||
| Ambient temperature | -25 … 80 °C (-13 … 176 °F) | |
| Mechanical specifications | ||
| Connection type | Connector M12 x 1 , 4-pin | |
| Housing material | Stainless steel 1.4305 / AISI 303 | |
| Sensing face | Ceramic | |
| Housing diameter | 12 mm | |
| Degree of protection | IP68 | |
| Mass | 42 g | |
This inductive proximity sensor features a PNP NO switching element and a rated operating distance of 1.5 mm. It is designed for flush mounting and operates with a DC output polarity.
Nominal ratings include an operating voltage range of 10 to 30 V DC and a switching frequency of 0 to 600 Hz. The hysteresis is typically 5%. The device is protected against reverse polarity and short circuits (pulsing). The voltage drop is less than or equal to 2 V, with an operating current of 0 to 200 mA. The no-load supply current is less than or equal to 10 mA.
Limit data specifies an operating pressure of 500 bar (7252 psi). Functional safety parameters include MTTFd of 728 a, a Mission Time (TM) of 20 a, and Diagnostic Coverage (DC) of 0%.
Approvals and certificates include UL approval (cULus Listed, General Purpose) and CSA approval (cCSAus Listed, General Purpose). CCC approval is not required for products rated less than or equal to 36 V. The ambient temperature range is -25 to 80 °C (-13 to 176 °F).
Mechanical specifications include an M12 x 1, 4-pin connector type. The housing material is Stainless steel 1.4305 / AISI 303, and the sensing face is ceramic. The housing diameter is 12 mm, and the degree of protection is IP68. The mass is 42 g.
Nominal ratings include an operating voltage range of 10 to 30 V DC and a switching frequency of 0 to 600 Hz. The hysteresis is typically 5%. The device is protected against reverse polarity and short circuits (pulsing). The voltage drop is less than or equal to 2 V, with an operating current of 0 to 200 mA. The no-load supply current is less than or equal to 10 mA.
Limit data specifies an operating pressure of 500 bar (7252 psi). Functional safety parameters include MTTFd of 728 a, a Mission Time (TM) of 20 a, and Diagnostic Coverage (DC) of 0%.
Approvals and certificates include UL approval (cULus Listed, General Purpose) and CSA approval (cCSAus Listed, General Purpose). CCC approval is not required for products rated less than or equal to 36 V. The ambient temperature range is -25 to 80 °C (-13 to 176 °F).
Mechanical specifications include an M12 x 1, 4-pin connector type. The housing material is Stainless steel 1.4305 / AISI 303, and the sensing face is ceramic. The housing diameter is 12 mm, and the degree of protection is IP68. The mass is 42 g.
