| Signal type | Digital Input |
| Rated current | 50 mA |
| Collective error message | Power Rail |
| Output/Output | not available , common pole terminal 9+ |
| Rated current | 30 … 20 mA + Iout |
| Connection | terminals 5, 6 |
| Degree of protection | IEC 60529:2001 |
| Safety Integrity Level (SIL) | SIL 2 |
| Connection | Power Rail or terminals 9+, 10- |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Response time | ≤ 200 µs |
| Pulse/Pause ratio | min. 100 µs / min. 100 µs |
| Output I | signal ; Transistor |
| Switching frequency | ≤ 5 kHz |
| Output II | signal ; Transistor |
| Labeling | space for labeling at the front |
| Degree of protection | IP20 |
| Ambient temperature | -20 … 60 ?°C (-4 … 140 ?°F) |
| Connection | terminals 1+, 2-; 3+, 4- |
| Ripple | ≤ 10 % |
| Connection side | control side |
| Display elements | LEDs |
| Mass | approx. 100 g |
| Signal level | 1-signal: (supply voltage) — 3 V max. for 50 mA 0-signal: blocked output (off-state current ≤ 10 µA) |
| Rated values | acc. to EN 60947-5-6 (NAMUR) |
| Rated voltage | 30 V DC |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Power dissipation | ≤ 800 mW including maximum power dissipation in the output |
| Configuration | via DIP switches |
| Protection against electrical shock | IEC 61010-1:2010 |
| Open circuit voltage/short-circuit current | approx. 10 V DC / approx. 8 mA |
| Input | EN 60947-5-6:2000 |
| Line fault detection | breakage I ≤ 0.1 mA , short-circuit I ≥ 6.5 mA |
| Output/power supply | not available , common pole terminal 9+ |
| Dimensions | 12.5 x 114 x 119 mm (0.5 x 4.5 x 4.7 inch) , housing type A2 |
| Switching point/switching hysteresis | 1.2 … 2.1 mA / approx. 0.2 mA |
| Rated voltage | 19 … 30 V DC |
| Connection | screw terminals |
| Input/power supply | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
| Control elements | DIP-switch |
| Connection side | field side |
| Electromagnetic compatibility | NE 21:2011 |
| Input/Output | reinforced insulation acc. to EN 50178, rated insulation voltage 300 Veff |
Buy Pepperl+Fuchs KCD2-ST-2 with the best possible price and delivery terms on eltra-trade.com
eltra-trade.com is your reliable source for industrial electrical parts. Our extensive product range includes various automation equipment, all available for fast delivery. We guarantee quality and competitive prices. Make us your preferred partner for all your electrical supply needs.
