Устройство монтируется на DIN-рейку. Подключение осуществляется через клеммные колодки с максимальным сечением проводника от 0.5 до 2.5 мм²; длина зачистки составляет от 5 до 6 мм.
| LED PWR | LED green |
| Current | 0 … 5 A |
| Mounting | DIN mounting rail |
| Connection | Connection terminals, max. conductor cross-section 0.5 to 2.5 mm2 Stripping length 5 to 6 mm |
| Potentiometer | Output voltage adjustment |
| Mission Time (TM) | 10 a |
| Ambient temperature | -10 … 70 °C (14 … 158 °F) with free convection |
| Efficiency | approx. 89 % |
| UL File Number | E223176 |
| Rated operating voltage | 115/230 VAC Wide range: 90… 265 VAC |
| Rated operating current | 2.2 A (115 V) 1.2 A (230 V) |
| Mass | approx. 900 g |
| Fusing | 3.15 AT |
| Capacity factor | approx. 0.5 (Depending on input voltage) |
| Supply frequency | 47 … 63 Hz |
| Storage temperature | -25 … 85 °C (-13 … 185 °F) |
| Voltage | 30 V ± 1 % Adjustment range 23 … 30 V AC |
| Protection class | I, Protective conductor connection necessary |
| Current limit | approx. 5.6 A |
| Degree of protection | IP20 |
| LED Overload | Red LED lights up for overload, flashes for hiccup mode |
| Diagnostic Coverage (DC) | 0 % |






