The SST-514-18 SmartTable HD Series uniquely combines the powerful IQ Damping Technology with passive precision tuned damping technology used in RS series tables. The two technologies compliment each other, creating the highest performance table in the industry. The included ST-300 SmartTable Controller can be used in a stand-alone (no computer required) mode and is also USB2 compatible. When operating in the stand-alone mode SmartTable HD automatically tunes the table to maximize table damping independent of load. When connected to a computer via the USB2 port, the included software allows users to further fine tune and calibrate the table to the experiment at hand and gather vibration data in both the frequency and time domains. Isolators are sold separately.
Технические характеристики
- Active Damping 2 IQ active dampers
- Structural Damping Range 80-550 Hz
- Tuned Damping 2 Narrowband Precision Tuned Dampers
- Broadband Damping Constrained layer core, damped working surface and composite edge finish
- Width 5 ft.
- Length 14 ft.
- Thickness 18 in.
- Working Surface 3/16 in. thick 400 series ferromagnetic stainless steel
- Surface Flatness ±0.004 in. over 2 ft. square
- Mounting Holes 1/4-20
- Mounting Hole Pattern 1 in. grid
- Mounting Hole Borders 0.5 in.
- Hole Sealing Type Easy clean conical cup, 0.75 in. deep, non-corrosive high impact reinforced composite material
- Bottom Skin Material 3/16 in. thick carbon steel
- Core Design Trussed honeycomb, vertically bonded closed cell construction, 0.010 in. steel sheet materials, 0.030 in. triple core interface
- Vibration Monitor Range 10-820 Hz
- Computer Interface USB
- I/O BNC output with sensitivity of 30V/(mm/s), Frequency range of 18-820V, Measurement range of 0-0.16mm/s
- Power Requirements 100-240 VAC, 1.5A, 50/60Hz
- Weight 2540 lb
- Crated Weight 2960 lb
