Product Description Rapid heating and cooling throughout the entire temperature range. Performance Temperature range. RW3-35 models from -35 to 150. RW3-25 models from -25 to 150. Microprocessor PID control. Three point temperature calibration / Automatic tuning / Automatic run. Suitable for both internal and external bath environments due to reduced turbulence by using five-speed adjustable pump and built-in cooling coil. (1 to 3 steps of the pump for internal circulation and 4 to 5 steps for external circulation) Pump Step 1 2 3 4 5 Max. pressure (psi) 0.5 1.1 2.4 4.9 5.9 Max. flow rate (L/min) 5.6 8.0 12.8 18.8 28.0 Bath fluid: water at the normal temperature. Convenience Bright VFD display with quick adjustable dial knob. (0.1resolution) Dual wait on/off timer modes. (1 min. to 99 hr. 59 min.) Convenient memory function of up to three frequently set temperature. Corrosion-resistant, leak-proof, round-cornered, and easy-to-clean stainless steel bath with easy access drain valve. Detachable condenser air-filter for easy maintenance of refrigerating efficiency. CFC-free refrigerant (R-507, R-404A) and a double service valve for leakage prevention. Quick-release front grill for easy cleaning of the condenser. RS-232 / USB interface for external control and data collection. Side handles enables convenience handling and transport Monitor via mobile app anytime, anywhere with LC Connected (mobile monitoring system) connection. (when purchased LC GreenBox) Easy maintenance of condenser by removable gridded vent Condenser air-filter for refrigerating efficiency Safety Isolated design of agitator, heater, and sensor by a baffle plate to minimize the turbulence in the bath fluid and also to protect users and samples against direct contact. Complete safety protection system with warning alarms. Low fluid level and dry-running, over-temperature, over-current. Keypad lock function prevents accidental changes during operation. Specifications for temperature range from -25 to 150 Model RW3-0525 RW3-1025 RW3-2025 RW3-3025 Bath volume (L / cu ft) 5 / 0.2 10 / 0.4 20 / 0.7 30 / 1.1 Temperature Working temperature range ( / ) -25 to 150 / -13 to 302 Temperature stability 1) (±, / ) 0.05 / 0.09 Cooling capacity 2) (bath fluid: ethanol) at -20 (-4), W 140 180 310 465 at 0 (+32), W 270 360 610 700 at +20 (+68), W 400 560 850 980 Refrigerator 1/3 LBP, R-507 1/3 LBP, R-507 1/2 LBP, R-404A 3/4 LBP, R-404A Pump(bath fluid: water) Max. pressure 5.9 PSI (406.8 millibar) Max. flow rate 7.4 gallons / minute (28 liters / minute) Dimension Bath opening / depth(WL, D) (mm / inch) 15099, 160/ 5.93.9, 6.3 211154, 180/ 8.36.1, 7.1 290214, 200/ 11.48.4, 7.9 300264, 230/ 11.810.4, 9 Exterior(WLH) (mm / inch) 308x480x733/ 12.118.928.9 366x532x780/ 14.420.930.7 386x602x825/ 15.223.732.5 446x662x895/ 17.626.135.2 Net weight (kg / lbs) 38 / 83.8 44 / 97 60 / 132.2 67 / 147.7 Electrical requirements (230V, 60Hz) 11A 11A 12.5A 13.5A Cat. No. AAH57041K AAH57051K AAH57062K AAH57071K Electrical requirements (230V, 50Hz) 11A 11A 12.5A 13.5A Cat. No. AAH57042K AAH57052K AAH57062K AAH57072K Electrical requirements (120V, 60Hz) 12.6A 12.6A Cat. No. AAH57043U AAH57053U for temperature range from -35 to 150 Model RW3-0535 RW3-1035 RW3-2035 RW3-3035 Bath volume (L / cu ft) 5 / 0.2 10 / 0.4 20 / 0.7 30 / 1.1 Temperature Working temperature range ( / ) -35 to 150 / -31 to 302 Temperature stability 1) (±, / ) 0.05 / 0.09 Cooling capacity 2) (bath fluid: ethanol) at -20 (-4), W 140 180 310 465 at 0 (+32), W 270 360 610 700 at +20 (+68), W 400 560 850 980 Refrigerator 1/2 LBP, R-404A 1/2 LBP, R-404A 3/4 LBP, R-404A 1 LBP, R-404A Pump(bath fluid: water) Max. pressure 5.9 PSI (406.8 millibar) Max. flow rate 7.4 gallons / minute (28 liters / minute) Dimension Bath opening / depth(WL, D) (mm / inch) 15099, 160/ 5.93.9, 6.3 211154, 180/ 8.36.1, 7.1 290214, 200/ 11.48.4, 7.9 300264, 230/ 11.810.4, 9 Exterior(WLH) (mm / inch) 308x480x733/ 12.118.928.9 366x532x780/ 14.420.930.7 386x602x825/ 15.223.732.5 446x662x895/ 17.626.135.2 Net weight (kg / lbs) 38 / 83.8 44 / 97 60 / 132.2 67 / 147.7 Electrical requirements (230V, 60Hz) 12.5A 12.5A 13.5A 14.5A Cat. No. AAH57141K AAH57151K AAH57161K AAH57171K Electrical requirements (230V, 50Hz) 12.5A 12.5A 13.5A 14.5A Cat. No. AAH57142K AAH57152K AAH57162K AAH57172K Technical data (according to DIN 12876) In case using silicon oil, you need to exchange other material tube (inlet and out late part), such as copper tube, a teflon tube instead of a silicon tube in fitting. 1) Technical data according to DIN 12876. (bath fluid : ethanol at -10) 2) The cooling capacity is measured under 230V / 60Hz electrical condition.
Технические характеристики
Technical Specificationsfor temperature range from -25℃ to 150℃
Model | RW3-0525 | RW3-1025 | RW3-2025 | RW3-3025 | |
---|---|---|---|---|---|
Bath volume (L / cu ft) | 5 / 0.2 | 10 / 0.4 | 20 / 0.7 | 30 / 1.1 | |
Temperature | Working temperature range (℃ / ℉) | -25 to 150 / -13 to 302 | |||
Temperature stability 1) (±℃ / ℉) | 0.05 / 0.09 | ||||
Cooling capacity 2) (bath fluid: ethanol) | at -20℃ (-4℉), W | 140 | 180 | 310 | 465 |
at 0℃ (+32℉), W | 270 | 360 | 610 | 700 | |
at +20℃ (+68℉), W | 400 | 560 | 850 | 980 | |
Refrigerator | 1/3 LBP, R-507 | 1/3 LBP, R-507 | 1/2 LBP, R-404A | 3/4 LBP, R-404A | |
Pump(bath fluid: water) | Max. pressure | 5.9 PSI (406.8 millibar) | |||
Max. flow rate | 7.4 gallons / minute (28 liters / minute) | ||||
Dimension | Bath opening / depth(W×L, D) (mm / inch) | 150×99, 160/ 5.9×3.9, 6.3 | 211×154, 180/ 8.3×6.1, 7.1 | 290×214, 200/ 11.4×8.4, 7.9 | 300×264, 230/ 11.8×10.4, 9 |
Exterior(W×L×H) (mm / inch) | 308x480x733/ 12.1×18.9×28.9 | 366x532x780/ 14.4×20.9×30.7 | 386x602x825/ 15.2×23.7×32.5 | 446x662x895/ 17.6×26.1×35.2 | |
Net weight (kg / lbs) | 38 / 83.8 | 44 / 97 | 60 / 132.2 | 67 / 147.7 | |
Electrical requirements (230V, 60Hz) | 11A | 11A | 12.5A | 13.5A | |
Cat. No. | AAH57041K | AAH57051K | AAH57062K | AAH57071K | |
Electrical requirements (230V, 50Hz) | 11A | 11A | 12.5A | 13.5A | |
Cat. No. | AAH57042K | AAH57052K | AAH57062K | AAH57072K | |
Electrical requirements (120V, 60Hz) | 12.6A | 12.6A | |||
Cat. No. | AAH57043U | AAH57053U | — | — |
for temperature range from -35℃ to 150℃
Model | RW3-0535 | RW3-1035 | RW3-2035 | RW3-3035 | |
---|---|---|---|---|---|
Bath volume (L / cu ft) | 5 / 0.2 | 10 / 0.4 | 20 / 0.7 | 30 / 1.1 | |
Temperature | Working temperature range (℃ / ℉) | -35 to 150 / -31 to 302 | |||
Temperature stability 1) (±℃ / ℉) | 0.05 / 0.09 | ||||
Cooling capacity 2) (bath fluid: ethanol) | at -20℃ (-4℉), W | 140 | 180 | 310 | 465 |
at 0℃ (+32℉), W | 270 | 360 | 610 | 700 | |
at +20℃ (+68℉), W | 400 | 560 | 850 | 980 | |
Refrigerator | 1/2 LBP, R-404A | 1/2 LBP, R-404A | 3/4 LBP, R-404A | 1 LBP, R-404A | |
Pump(bath fluid: water) | Max. pressure | 5.9 PSI (406.8 millibar) | |||
Max. flow rate | 7.4 gallons / minute (28 liters / minute) | ||||
Dimension | Bath opening / depth(W×L, D) (mm / inch) | 150×99, 160/ 5.9×3.9, 6.3 | 211×154, 180/ 8.3×6.1, 7.1 | 290×214, 200/ 11.4×8.4, 7.9 | 300×264, 230/ 11.8×10.4, 9 |
Exterior(W×L×H) (mm / inch) | 308x480x733/ 12.1×18.9×28.9 | 366x532x780/ 14.4×20.9×30.7 | 386x602x825/ 15.2×23.7×32.5 | 446x662x895/ 17.6×26.1×35.2 | |
Net weight (kg / lbs) | 38 / 83.8 | 44 / 97 | 60 / 132.2 | 67 / 147.7 | |
Electrical requirements (230V, 60Hz) | 12.5A | 12.5A | 13.5A | 14.5A | |
Cat. No. | AAH57141K | AAH57151K | AAH57161K | AAH57171K | |
Electrical requirements (230V, 50Hz) | 12.5A | 12.5A | 13.5A | 14.5A | |
Cat. No. | AAH57142K | AAH57152K | AAH57162K | AAH57172K |
※ Technical data (according to DIN 12876)
※ In case using silicon oil, you need to exchange other material tube (inlet and out late part), such as copper tube, a teflon tube instead of a silicon tube in fitting.
1) Technical data according to DIN 12876. (bath fluid : ethanol at -10℃)
2) The cooling capacity is measured under 230V / 60Hz electrical condition.