Nickel Silver Strip CuNi18Zn27-R390 CuNi18Zn27-H090 CuNi18Zn27-R470 CuNi18Zn27-H120 CuNi18Zn27-R540 CuNi18Zn27-H170 CuNi18Zn27-R600 CuNi18Zn27-H190 CuNi18Zn27-R700 CuNi18Zn27-H220 INISHES: BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Type of coating: Electrolytic EN14436 and Hot dip EN 13148 * The data contained in this website are mere information and do not constitute, in any case, contractual conditions of supply. Except for error or omission.
Технические характеристики
CharacteristicsShaperibbonThickness
Min.: 3 mm (0.118 in)
Max.: 1,250 mm (49.213 in)
Length
5,000 mm (196.85 in)
Width
Min.: 0.05 mm (0 in)
Max.: 3 mm (0.12 in)
