Nickel Silver Strip CuNi18Zn20-R380 CuNi18Zn20-H085 CuNi18Zn20-R450 CuNi18Zn20-H115 CuNi18Zn20-R500 CuNi18Zn20-H160 CuNi18Zn20-R580 CuNi18Zn20-H180 CuNi18Zn20-R640 CuNi18Zn20-H200 FINISHES: BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Type of coating: Electrolytic EN14436 and Hot dip EN 13148 * The data contained in this website are mere information and do not constitute, in any case, contractual conditions of supply. Except for error or omission.
Технические характеристики
CharacteristicsShaperibbonThickness
Max.: 1,250 mm (49.213 in)
Min.: 3 mm (0.118 in)
Length
5,000 mm (196.85 in)
Width
Max.: 3 mm (0.12 in)
Min.: 0.05 mm (0 in)
