Nickel Silver Strip CuNi12Zn24-R360 CuNi12Zn24-H080 CuNi12Zn24-R430 CuNi12Zn24-H110 CuNi12Zn24-R490 CuNi12Zn24-H150 CuNi12Zn24-R550 CuNi12Zn24-H170 CuNi12Zn24-R620 CuNi12Zn24-H190 FINISHES: BARE MATERIAL The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier when requesting the quote and in the order. Normally, a small residual layer of lubricant is left on cold-rolled products, which is authorised unless otherwise specified. ROUGHNESS EN 1654 This must be agreed between the customer and the supplier when requesting the quote and confirming the order. SURFACE CONDITION EN 13599 The strips must be clean and free of detrimental defects, which must be specified by agreement between the customer and the supplier in the request for quotes and in the order. Normally, a small residual layer of lubricant is left on cold-drawn products, and this is acceptable unless otherwise specified. Discolouration is acceptable, provided that it is not detrimental to the use of the product. TIN COATINGS Tin coatings for strips and copper strips and copper alloys: Type of coating: Electrolytic EN14436 and Hot dip EN 13148 * The data contained in this website are mere information and do not constitute, in any case, contractual conditions of supply. Except for error or omission.
Технические характеристики
CharacteristicsShaperibbonThickness
Max.: 1,250 mm (49.213 in)
Min.: 3 mm (0.118 in)
Length
5,000 mm (196.85 in)
Width
Max.: 3 mm (0.12 in)
Min.: 0.05 mm (0 in)
