| Automatic Fixture Removal |
| Pulsed-RF Measurements |
| Time-domain measurements |
| Dynamic Uncertainty for S-Parameter Measurements |
| Add IF inputs |
| Add pulse modulator to internal first source |
| Add pulse modulator to internal second source |
| Internal pulse generators, Add 4 |
| Noise figure measurements using standard receivers |
| Fully-corrected noise-figure measurements to 13.5 GHz |
| Frequency offset measurements |
| Scalar calibrated converter measurements |
| Vector and scalar calibrated converter measurements |
| Add embedded LO measurements |
| Gain compression measurements |
| Intermodulation distortion measurements |
| Source phase control |
| Differential and I/Q devices application |
| Spectrum Analyzer |
| Fast CW mode |
| Rack mount kit for installation without handles |
| Rack mount kit for installation with handles |
| 2 ports, single source |
| 2-ports, single source, with configurable test set |
| Add extended power range and bias-tees to 2 port analyzer |
| Add internal second source, combiner and mechanical switches to 2-port analyzer |
| Application for use with standard CalPods |
| Application for use with temperature-characterized CalPods |
| 4 ports, dual source |
| 4-ports, dual source, with extended power range |
| Add extended power range and bias-tees to 4 port analyzer |
| Add internal combiner and mechanical switches to 4-port analyzer |
| Integrated true-mode stimulus application |
| Nonlinear component characterization, full frequency range |
| Nonlinear X-Parameters |
| Nonlinear Pulse Envelope Domain |
| Arbitrary load impedance X-parameters |
| N-port calibrated measurements |
| Windows 7 |
Additional Features:
- 10 MHz to 26.5 GHz
- 2- or 4-ports with two built-in sources
- 132 dB system and 130 dB receiver dynamic range, 32,001 points, 200 channels, 15 MHz IF bandwidth
- High output power (+18 dBm), low harmonics (-60 dBc) and a wide power sweep range (38 dB)
- Best dynamic accuracy: 0.1 dB compression with +13 dBm input power at the receiver
- Low noise floor of -114 dBm at 10 Hz IFBW
Applications:
- S-parameters (CW and pulsed)
- Noise figure
- Gain compression
- Intermodulation and harmonic distortion
- Conversion gain/loss
- True-differential stimulus
- Millimeter-wave
- Nonlinear waveform and X-parameter® characterization
- Antenna test
The Agilent N5242A PNA-X network analyzer is the world´s most integrated and flexible single-connection microwave test engine for measuring active devices such as amplifiers, mixers, and frequency converters. You can choose from five frequency models to meet your specific device test needs: 13.5, 26.5, 43.5, 50, and 67 GHz. The PNA-X provides unrivaled configurability with a built-in second source, combiner, and internal signal-routing switches.
Технические характеристики
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Frequency | 26.5 GHz |
