CONEX-SR50CC is a compact rotation stage integrated with a CONEX-CC controller designed to rotate optical components up to 1-inch diameter, such as polarizers, wave plates, or wedges. The small size allows use in confined spaces, such as laser cavities, disk texturing machines, or manufacturing areas for fiber optical components.
SR50CC has a higher resolution (0.001°), better repeatability, and accuracy than PR50CC.
Технические характеристики
- Stage Type SR50CC
- Travel Range 360
- Centered Load Capacity 30 N
- Maximum Speed 4/s
- Maximum Torque 0.4 Nm
- Minimum Incremental Motion 4.0 mdeg
- Absolute Accuracy, Typical ±,15 mdeg
- Absolute Accuracy, Guaranteed ±,30 mdeg
- Uni-directional Repeatability, Typical ±,2.5 mdeg
- Uni-directional Repeatability, Guaranteed ±,5.0 mdeg
- Bi-directional Repeatability, Typical ±,25 mdeg
- Transversal Compliance 160 rad/Nm
- Wobble, Typical ±,20 rad
- Wobble, Guaranteed ±,50 rad
- Drive Type DC Servo
- Drive Mechanism Ground worm gear
- Worm Gear Ratio 1:70
- Origin Optical, centered
- Origin Repeatability ±,25 mdeg
- Feedback Motor mounted rotary encoder, 48 pts/rev
- Encoder Resolution 0.001
- Bearings Ball bearings
- Control Loop Floating point digital PID loop with velocity and friction feedforward, 2 kHz servo rate
- Compliance RoHS 3, CE
- Display Two-color LED
- Programming 40+ intuitive, 2 letter ASCII commands.
- Material Aluminum
- Inertia 0.015 kg.m2
- Aperture Diameter 25.7 mm
- Weight 0.3 kg
- Power Requirements 24 VDC, 8 W
- Cable Length 3 m
- Computer Interfaces USB
- Controller Dimensions 93.2 x 53 x 23 mm
- MTBF 10,000 h (25% load, 30% Duty cycle)
- RoHS Compliant
