The UZS80PP Vertical Stage offers 4.5 mm vertical adjustment of loads up to 30 N and mounts on top of our UTS series linear stages. The UZS80PP stepper motor version is a more economical version for less demanding applications. When used with motion controllers with high micro-step capability, like the XPS, ESP302 or SMC100PP, low noise operation and very small incremental motions are guaranteed. The UZS80PP does not use encoder feedback, but reaches a position by the number of commanded steps and micro-steps. For this purpose, the stepper motor is directly attached to the worm screw.
Технические характеристики
- Travel Range 4.5 mm
- Minimum Incremental Motion 0.20 m
- Maximum Speed 2 mm/s
- Centered Load Capacity 30 N
- Accuracy, Typical ±,0.35 m
- Accuracy, Guaranteed ±,2.0 m
- Bi-directional Repeatability, Typical ±,0.5 m
- Bi-directional Repeatability, Guaranteed ±,2.2 m
- Uni-directional Repeatability, Typical ±,0.25 m
- Uni-directional Repeatability, Guaranteed ±,0.7 m
- Drive Screw Pitch 0.8 mm
- Limit Switches Optical
- Origin Optical, centered
- Origin Repeatability ±,2 m
- Connectors DB15 Male
- Pitch, Typical ±,37 rad
- Pitch, Guaranteed ±,75 rad
- Compliance in Pitch 100 µrad/Nm
- Roll, Typical ±,50 rad
- Roll, Guaranteed ±,100 rad
- Compliance in Roll 80 µrad/Nm
- Cable Length 3 m
- Thread Type M4
- Weight 2.8 kg
- MTBF 20,000 h (25% load, 10% duty cycle)
- Compliance RoHS 3, CE
