The 8743-CL 2-axis closed-loop intelligent motion controller/driver provides fine tuning, absolute positioning, compact and low cost solution for driving New Focus closed-loop Picomotors products. It is a single-box solution that can be manual controlled with the New Focus 8758 hand control pad or computer controlled via USB, RS-485, or Ethernet communication interfaces using Newport Motion Control Language (NMCL) command set. All three computer interfaces are well supported via Windows DLL, sample LabVIEW VIs, and intuitive graphical user interface (GUI) Windows application with device auto-discovery feature. Each model 8743-CL controller/driver has two 4-pin RJ-22 single output ports and two 15-pin D connector for the encoder signal that can be used with any single-channel closed loop Picomotor actuator at any given time.
Технические характеристики
- Type Motion Controller
- Number of Axis 2
- Computer Interfaces 10/100 Ethernet, USB, RS-485
- Power Requirements 10.5 to 14.5 VDC
- Power Consumption 11 W @ 2 kHz Sustained Speed, 2 W Idle
- Maximum Pulse Rate 2 kHz
- Operating Temperature 0 to 65C
- Storage Temperature -40 to 95C
- Weight 0.272 kg
