The vacuum compatible AJS8-100-0.5H-V6 low outgassing adjustment screws are designed for demanding 1×10-6 Torr vacuum environments. Several key steps are taken in the design, assembly and packaging of these parts. We incorporate metals into our designs that are known to be vacuum compatible and desired or approved for use in vacuum systems. In particular, bronze is used in place of brass to virtually eliminate the presence of zinc, which will actually sublimate in a vacuum environment. Following the machining of the screw and bushing, each component is chemically cleaned in an ultrasonic bath to remove contaminating substances. Assembly is done in a cleanroom environment where lubrications that have recorded vacuum compatibility test data are used. Finally the adjustment screws are packaged in specially-cleaned vacuum-sealed bags, ready for cleanroom and vacuum chamber applications. The AJS8-100-0.5H-V6 Miniature Adjustment Screw has precision rolled 8-100 threads and offers 0.5 inch (12.7 mm) precision travel. The standard 0.250 in. (6.4 mm) diameter collet is threaded with a nut for mounting to optical mounts and stages. Our patented thread-pitch lock secures the adjustment screw from turning by simply tightening a setscrew. The lock screw conveniently located on the end next to the drive screw. A single wrench is used for both adjustment and locking.
Технические характеристики
- Travel Range 12.7 mm
- Adjustment Screw Thread 8-100
- Drive Type Hex
- Axial Load Capacity 45 N
- Lock Side Lock
- Tip Style Ball
- Sensitivity 0.71 m
- Vacuum Compatibility 10-6 Torr
