Vertical electromagnetic level gauge mount inside the tank with m12 connection — You can obtain the desired length by simply cutting the steel rod, with a simple cutter, or you can vary the point of intervention using a float with a through hole that allows, whenever there is a need, to change the point control of the liquid. — Can be used for dirty liquids, water, petroleum, oils and coolants tolerate the presence of ferrous metal particles also, as the float magnet holder and is integral with the rod. — A float can only operate a single Reed (min. or max. Level). — Total safety determined by the fact that the electrical part is totally separate in the side of the reservoir and perfectly sealed with respect to the outside by means of a total resin of the outgoing cable. — The Rapid Level are supplied with rods suitable for controlling a maximum altitude of 500 or 1000mm. — They can be requested already arranged for the control of pre-determined dimensions. — For tanks with liquid in motion, may be required stilling brass or AISI 316. The ideal level for controlling a switching point (maximum or minimum) in a completely safe in any conditions please. Ideal for clean liquids, dirt, oils, grasselli, water glycol, etc
Технические характеристики
CharacteristicsTechnologymagnetic floatMediumfor liquidsMaterialstainless steel, brassMountingvertical, side-mountOther characteristicsfor tanks, IP65Process temperature
Max.: 120 °C (248 °F)
Min.: -20 °C (-4 °F)
Process pressure
Max.: 10 bar (145.04 psi)
Min.: 0 bar (0 psi)
