IEG-INOX-N2F — IEG-INOX-MMF S/Steel electromagnetic level indicator with 1 or 2 contacts Flange connections SPST or SPDT contacts Entirely in AISI 316 stainless steel ELECTROMAGNETIC LEVELS MATERIAL brass S/Steel PVC ATEX Atex OUTPUT on/off Ohm 4/20 mA THREADED CONNECTIONS 1/2’GAS 3/4’GAS 3/8’GAS 1’GAS 1’1/4 GAS 1’1/4 NPT 1’1/2 GAS 2’GAS M18X1,5 FLANGED CONNECTIONS Flange diameter 55 Flange diameter 70 Flange diameter 100 Clamp 2’1/2 IEG-INOX-N1F Material: S/Steel Output: on/off Flange connections: Flange diameter 55, Flange diameter 70 IEG-INOX-N2F — IEG-INOX-MMF S/Steel electromagnetic level indicator with 1 or 2 contacts Flange connections SPST or SPDT contacts Entirely in AISI 316 stainless steel USE: Made to ensure, with maximum safety, the minimum or maximum level of liquids in tanks containing corrosive substances. Entirely in AISI 316 stainless steel, they are suitable for use in the chemical, pharmaceutical and food industries. OPERATION: When the float of the indicator meets the Reed switch incorporated in the tube at the pre-established distances, the contact is activated by the magnet housed in the float opens or closes, thus obtaining the possibility of sending a luminous or acoustic signal or disconnecting any electrical equipment connected to it. FITTING: The indicator must be fitted in the vertical position, and the float must be at least 35mm from ferrous surfaces (walls, tanks, etc.). Flange seal is guaranteed by an oilproof synthetic rubber seal.
Технические характеристики
CharacteristicsTechnologymagnetic floatMediumfor liquidsApplicationsfor tanksMaterialstainless steelMountingthreaded, vertical, flangeOther characteristicsreed switch, IP65, IP68, chemical-resistantProcess temperature
50 °C, 60 °C, 70 °C, 80 °C (122 °F)
Process pressure
Min.: 0 bar (0 psi)
Max.: 10 bar (145.04 psi)
