The UMR3.5 Precision Double-Row Ball Bearing Linear Stage features steel construction for high stability and rigidity. The ball bearings and precision-ground bearing surfaces provide exceptional linear travel, with an angular deviation
Double-Row Ball Bearings for Smooth Travel & Heavier Loads
Ball bearing slides provide smoother translation from a rolling motion. Ball bearings are captured in guide ways by means of hardened steel rods with a gothic profile. This creates only two points of contact for minimal friction, and provides extremely smooth travel for even the smallest of incremental movements. Fewer points of contact also mean less differential slip and provide higher load capacities compared to the 4-point contact of other ball-bearing designs. The lower differential slip keeps friction and wear minimal, adding to the durability and lifetime of these stages.
MVN Vertical Stage Compatibility
UMR stages are compatible with MVN Series Vertical Stages allowing you to build XZ or XYZ stage stacks with a horizontal oriented mounting platform. An MVN50 vertical stage is shown on top of UMR5.25 linear stage.
UTR Rotation Stage Compatibility
UMR linear stages are compatible with UTR Series Rotation Stages allowing you to built X or XY stage stacks with a rotatable mounting platform. A UTR80 rotation stage is shown mounted on top of UMR8.25 linear stage.
XYZ Configurations
Abundant tapped hole patterns on these stages are included to provide the most options for mounting components on the stage mounting surface. Two stages can be easily stacked to provide XY translation (except the UMR5.5). Z configuration can be assembled using the EQ Series Angle Brackets. Two XYZ configurations of (3) UMR5.25 linear stages with EQ50 angle brackets are shown.
Compatible Actuators
UMR stages can achieve 1 µm sensitivity when used with BM series standard micrometer heads or 0.1 µm sensitivity with DM series differential micrometers. Select models can also be driven by motorized actuators. Actuators are not included. Refer to the specification tables above to see compatible actuators and required adapters for each UMR stage.
Технические характеристики
- Axes of Travel X
- Maximum Stage Travel 5 mm
- Centered Normal Load Capacity 600 N
- Vertical Axial Load Capacity 40 N
- Angular Deviation
- Compliance in Pitch 0.3 mrad/Nm
- Compliance in Roll 0.7 mrad/Nm
- Compliance in Yaw 0.5 mrad/Nm
- Material Steel
- Bearings Double-Row Ball Bearings
- Bearing Constant 20 mm
- Drive Location Center drive
- Drive Torque 0.04 Nm
- Platform Size 29 x 38.5 mm
- Height 13 mm
- Thread Type 8-32
- Recommended BM Micrometer BM11.5
- Recommended DM Differential Micrometer DM11-5
