Series SI 3 precision slides feature a dual-acting pneumatic cylinder that has the sole purpose of pushing and pulling the load, a ground steel guide that is integral with the body, and a ball recirculation pad that is fixed onto the moving table and is designed to withstand all the loads and movements applied. This ensures accurate movement with virtually no play, and the piston rods do not suffer wear as there are no lateral loads. All the slides are equipped with sensor magnets. The body can be secured on many sides. The load side can be fixed onto the table from the top or the front. The compressed air supply can be connected on three sides. The retractable sensors can be fitted on the right or on the left. All these possibilities make the application extremely flexible. The width is extremely reduced to allow installation in small spaces and the combination of several reduced-pitch slides. Quantity per package: 0 Minimum order quantity: 0 Unit of measure: items
Технические характеристики
CharacteristicsTechnologywith recirculating ball carriageOther characteristicsprecision, for cylinders, pneumaticLoad
Max.: 188 N
Min.: 17 N
Speed
Max.: 500 mm/s
Min.: 30 mm/s
Operating temperature
Max.: 80 °C (176 °F)
Min.: -10 °C (14 °F)
