The SMC100CC is a single axis motion controller/driver for DC servo motors up to 48 VDC at 1.5 A rms. It provides a very compact and low-cost controller for most of Newport»s stages, including the popular GTS and ILS linear stages, URS rotation stages, and LTA actuators. Communication with the SMC100 is via the integrated RS-232-C interface, or a USB port using the SMC-USB adapter. The SMC100 controller requires a «straight-through» type of RS232 cable SMC-232, when connecting it to a PC. A Null-Modem cable will not work. The controller is shipped with one 0.2 m long power cable and one 0.2 m long RS-485 network cable which can be used to daisy chain one controller to another.
Технические характеристики
- Command Set 40+ intuitive, 2 letter ASCII commands. Command set includes software limits, user units, synchronized motion start, stop all
- Computer Interfaces RS-232-C with 57,600 baud rate, USB compatible with external adapter SMC-USB (requires Windows™ operating system), RS-485 internal link for chaining up to 31 controllers from the same COM port
- Control Algorithm PI Position, PIDFF Velocity, PIDFF Acceleration, PIDDualFF Voltage, Variable PID’s, Derivative Cut-off Filter, Notch Filters, or Open Loop
- Drive Type DC Servo
- ESP Compatibility ESP Stage Detection
- Motion Point to Point, S-gamma profile with accel and jerk time control, Continuous jog
- Motor Control 48 VDC @ 1.5 A rms, 3 A peak, 100 kHz PWM switching frequency
- Number of Axis 1
- Interface 2-Color LED
- Dimensions 161 x 140 x 33 mm
