Комплект жесткого резервуара для воды, 10м3

last updated : 2018/12/31

General information

Rigid lightweight water tank: quick setup, packs to a small volume for transport (as compared to its final capacity).

Corrugated steel sheets provide the tank’s rigidity, models made of flat plain steel sheets are not recommended. The sheets for the 10m³ tank are specifically designed for this model. The sheets for the 45, 70 and 95m³ models are similar in shape and size.

The tools required to install the tanks are provided in the tank kit, code KWATTANKRTO1. To connect tanks together and to a network, order the standard fittings set, code KWATTANKRFI3.

Where possible, tanks should be set up in an elevated position to permit gravity distribution.

Ensure the tanks are adequately secured, particularly when empty or during high winds, use guy ropes and bank earth around the lower sections.

Use tank roof covers, keep them well lashed down.

Specifications

Corrugated galvanized iron sheet.

Each tank has 3 outlet holes for 3″ connectors, one hole fitted with a blanking plate.

EPDM synthetic rubber liner, 1.25mm thick, reinforced, welded, to fit d: 6.4m tank

The liner allows for a 300mm-turndown on the outside with 4 eyelets spaced at 1m-intervals around the edges.

Connector flanges to be pre-assembled with studs, bolts, washers and gaskets.

PVC-coated polyester roof.

The base plate for the roof-support column has countersunk holes to prevent damage to the lining from friction with the bolt heads.

Bolts and nuts are all zinc-plated for high corrosion resistance.

Good-quality spanners, designed for intensive use.

KWATTANKR10 Content list — Export content list (excel file)

Code	Description	Qty
KWATTANKR10A	KIT, LINER+ACCESSORIES, for 10m3 rigid corrugated watertank	1
Code Description Qty In Each Total qty APACTAPE50RB TAPE ADHESIVE, canvas reinforced, 55mmx50m roll, black 1 1 EHDWBACLH077 BAND CLIP, for hose pipe, high torque, 77-95mm 1 1 EHDWBOLTGR12 BOLT, galva, round head with slot drive, d:10mm, L:20mm 410 410 EHDWCLIPSP25 CLIP, spring fasteners , to clip on 25mm diam. edge support 25 25 EHDWNUTSGH10 NUT, GALVANISED, for 10 mm diam. bolt, hexagonal 410 410 EHDWWASHFL10 WASHER, FLAT, galva. for 10 mm diam. bolt 5 5 ETOOPODGIS01 PODGER, spike to align iron sheet bolt holes 1 1 KWATREPAEPLI KIT, REPAIR, for rigid water tank EPDM rubber liners 1 1 Code Description Qty In Each Total qty WWAKREPAEPSH EPDM MATERIAL SPARE, 1 x 1m 1 1 WWAKREPAEPTA ADHESIF TAPE, to repair EPDM liners, 50mm x 10m 1 1 WNECBRCA3F3T COUPLING, BRASS, ADAPTOR, 2 pces, thr. fem. 3’/hose tail 3′ 1 1 WNECIRFL3ASS CONNECTOR, FLANGE ASSEMBLY, 3′, complete set 2 2 WNEVBRGA3FF VALVE, BRASS, GATE, 3′, threaded fem/fem 1 1 WTOOSEALTEFL SEAL TAPE, ‘Teflon’, for water connectors, roll 12mm x 12m 1 1 WWAKRTOXCA12 SPLIT CAPPING, PVC, d:12mm, per metre length 8 8 WWAKRTOXCA25 SPLIT CAPPING, PVC, d:25mm, per metre length 8 8 WWAKRTOXGUIDE MANUAL, Oxfam Water Storage Pack, in a plastic bag 1 1 WWAKRTOXL10 LINING, 10m3, EPDM reinforced synth. rubber, thick: 1.25mm 1 1
KWATTANKR10R	KIT, CONICAL ROOF, for 10m3 rigid corrugated watertank	1
Code Description Qty In Each Total qty EHDWNUTSEY10 EYE NUT, M10 12 12 HSHEROPE06P ROPE, POLYPROPYLENE, diam. 6 mm, twisted 100 100 KWATREPAF01 KIT, REPAIR, for flexible tank PVC reinforced material 1 1 Code Description Qty In Each Total qty APACIATAC01 CONTAINER, IATA, for PVC flexible watertank repair kit 1 1 EHDWGLUENEO1 GLUE, neoprene contact, tube 120g 1 1 EHDWSANQPM12 SAND PAPER, dry/wet use, n.120, A4 sheet 1 1 EHDWTHINTR01 THINNER, trichlo-ethylene, 1L 1 1 WWAKREPAPVSH SHEET, PVC, for flexible PVC watertank repair, 1 x 0.5m 1 1 WWAKRTOXRO10 ROOF, 10 m3 rigid tank, PVC coated polyester, + eyelets 1 1 WWAKRTOXROS1 ROOF SUPPORT ASSEMBLY, for 10m3 rigid tank 1 1
KWATTANKR10S	KIT, STEEL, for 10m3 rigid corrugated watertank	1
Code Description Qty In Each Total qty WWAKRTOXIS03 IRON SHEET, corrugated, for rigid tank 10m3 15 15 WWAKRTOXIS04 IRON SHEET, corrugated, for rigid tank 10m3, + outlets 3 3

Технические характеристики