Технические характеристики
| Type number | C9100-23B |
|---|---|
| Camera head type | Hermetic vacuum-sealed chamber air/water-cooled head *1 |
| Window | Anti-reflection (AR) coatings on both sides, single window |
| AR mask | Yes |
| Imaging device | Electron Multiplying Back-Thinned Frame Transfer CCD |
| Effective number of pixels | 512 (H) × 512 (V) |
| Cell size | 16 μm (H) × 16 μm (V) |
| Effective area | 8.19 mm (H) × 8.19 mm (V) |
| Pixel clock rate (EM-CCD readout) | 22 MHz, 11 MHz, 0.6875 MHz |
| Pixel clock rate (NORMAL CCD readout) | 0.6875 MHz |
| EM (electron multiplying) gain | 1×, 4× to 1200× (typ.) *2 |
| Ultra low light detection | Photon Imaging mode (1, 2, 3) |
| Fastest readout speed | 70.4 frames/s to 1076 frames/s |
| Readout noise (EM-CCD readout) | 36 electrons (EM gain 4×, at 22 MHz) (rms) (typ.) 25 electrons (EM gain 4×, at 11 MHz) (rms) (typ.) 8 electrons (EM gain 4×, at 0.6875 MHz) (rms) (typ.) 1 electron max. (EM gain 1200×) (rms) (typ.) |
| Readout noise (NORMAL CCD readout) | 8 electrons (at 0.6875 MHz) (rms) (typ.) |
| Full well capacity | EM-CCD readout: 370 000 electrons (typ.) *3 NORMAL CCD readout: 140 000 electrons (typ.) |
| Analog gain | EM-CCD readout (22 MHz): 1× EM-CCD readout (11 MHz/0.6875 MHz): 0.5×, 1× Normal CCD readout: 1×, 2×, 3×, 4×, 5× |
| Cooling temperature (Forced-air cooled) | At temperature control: -65 ℃ (Ambient temperature: 0 ℃ to +30 ℃) At maximum cooling (typ.): -80 ℃ (Ambient temperature: stable at +20 ℃) |
| Cooling temperature (Water cooled) | At temperature control: -80 ℃ (Water temperature: +20 ℃) At maximum cooling (typ.): -100 ℃ (Water temperature: lower than +10 ℃) |
| Temperature stability (Forced-air cooled) | ±0.01 ℃ (typ.) |
| Temperature stability (Water cooled) | ±0.01 ℃ (typ.) |
| Dark current (Forced-air cooled) | 0.005 electron/pixel/s (-65 ℃) (typ.) |
| Dark current (Water cooled) | 0.0005 electron/pixel/s (-80 ℃) (typ.) |
| Clock induced charge | 0.0015 events/pixel/frame (typ.) |
| Exposure time (Internal sync mode) | 13.9 ms to 1 s (22 MHz) 27.2 ms to 2 h (11 MHz) 421.5 ms to 2 h (0.6875 MHz) |
| Exposure time (External trigger mode) | 10 μs to 1 s (22 MHz) 10 μs to 2 h (11 MHz/0.6875 MHz/Normal-CCD readout) |
| A/D converter | 16 bit |
| Output signal/External control | IEEE1394b |
| Sub-array | Every 16 lines (horizontal, vertical) size, position can be set |
| Binning | 2×2, 4×4, 8×8, 16×16 *4 |
| External trigger mode | Edge trigger, Level trigger, Start trigger, Synchronous readout trigger |
| Trigger output | Exposure timing output, Programmable timing output (Delay and pulse length are variable.), Trigger ready output |
| Image processing features (real-time) | Background subtraction, Shading correction, Recursive filter, Frame averaging, Spot noise reducer *5 |
| EM gain protection | EM warning mode, EM protection mode |
| EM gain readjustment | Available |
| Lens mount | C-mount |
| Power supply | AC 100 V to 240 V, 50 Hz / 60 Hz |
| Power consumption | Approx. 140 VA |
| Ambient storage temperature | -10 °C to + 50 °C |
| Ambient operating temperature | 0 °C to + 40 °C |
| Performance guaranteed temperature | 0 °C to + 30 °C |
| Ambient operating/storage humidity | 70 % max. (with no condensation) |
