Additional Features:
- Output voltage: 0 to 20 V
- Output current: 0 to 5 A
- Power: 100W
- High throughput
- Precision low current measurement
- Low-output noise
- High-speed programming
- GPIB and RS-232 interface
- VXI plug & play drivers
- Fast, low-noise outputs
- Programmable active down-programmer sinks the full rated current
- Dual-range, precision low current measurement
- Built-in measurements and advanced programmable features
- Protection features to ensure DUT safety
Programming Accuracy at 25°C ± 5°C
- Voltage: 10 mV
- + Current: 0.05% + 2 mA
Ripple & Noise (20 Hz to 20 MHz)
- Voltage Normal Mode peak-to-peak: 3 mV
- Voltage Normal Mode RMS: 0.3 mV
- Fast mode RMS/ peak-to-peak: 1 mV/ 10 mV
- Current RMS: 2 mA
The Agilent HP 6632B is rated at 20V, 5A. It is an ideal power source for demanding production test applications. It offers high performance and precision measurements in a one-box solution. To reduce test-system development time and provide precision testing, the Agilent HP 6632B provides current measurement down to the microamp level. It also provides high-speed programming with less than 4 millisecond response time.
This series of linear-regulated 80-100 W DC power supplies is designed to maximize the throughput of DUTs through the manufacturing test process. Both programming and measurement are optimized for speed. The active downprogrammer can sink up to the full rated current of the power supply, which quickly brings the power supply output to zero volts. The 6630B series offers many advanced programmable features including stored states and status reporting. Programming is done using industry standard SCPI commands via the GPIB or RS-232.
Test system integration is further simplified by using the VXIplug&play drivers. The optional relays simplify system design and troubleshooting.
The optional front panel binding posts make the 6630B series convenient on the R&D lab bench. The built-in microamp measurement system helps the engineer to easily and accurately monitor the output voltage and current without a complicated test setup.
Технические характеристики
| Manufacturer | Agilent, HP, Keysight |
|---|---|
| Condition | Used |
| Current | 5 A |
| Voltage | 20 V |
| Power | 100 W |
