last updated : 2019/03/18
| Code | Description | Budget Price | Ship. weight | Ship. vol. | ||
|---|---|---|---|---|---|---|
| EELEINVTST3.5 | INVERTER/CHARGER, Studer XTM-3500-24, 3.5kVA — 230V, 24V | CH 2 355,00 | 26,7kg | 0,0672m³ | Add | |
General information
Power inverter, 24VDC to 230VAC, 3kVA continuous, 9kVA peak power (5 sec.)
- Standard inverter for server room first stage backup, combined where needed with APC UPS
- Minimal recommended Battery capacity is 200Ah. E.g. 2 x 12V/200Ah (EELESOLBA200) or 12 x 2V-cells or greater capacity
- If there are many and long power cuts, prefer installing 12 x 2V/600Ah (EELESOLBA600) or 2V/1200Ah (EELESOLBA1200) cells
- Set battery charge current to approx. 10% of nominal battery capacity (e.g. 600Ah ->, 60A)
- Since April 2017, also includes RCC-02 Remote Control and Programming Centre (which can also be ordered as a separate item EELEINVTRCC02) and BTS-01 Battery Temperature Sensor.
- It is recommended to always install an RCC-02 with the XTM Inverter and VarioTrack charge controller, as it allows viewing the actual values at a glance, changing settings if needed and registering the LOG-files on the microSD-card.
- Use RCC-02 to adjust input current to your source (generator or breaker rating, 1-32A)
- BTS-01 battery temperature sensor should be attached onto the battery side.
- Caution: For countries with 120 or 110V, order EELEINVTST120 instead. Same functionalities as EELEINVTST3.5, but for 120V mains. Both types can be set to 50 or 60Hz as required.
- Purchase via HQ recommended (compulsory for ICRC). The inverter is functionally tested before shipment.
- Additional information: http://www.studer-innotec.com/en/products/xtender-series/
Specifications
Features | Inverter/charger XTM 3500-24 – 230VAC DC cables Red/Black 70mm2 1.5m with terminals M10 AC – Input cabling 3 x 2.5mm2 / 5m with Swiss male plug AC – Output cabling 3 x 2.5mm2 / 5m with Swiss-female plug Spare fuses CF8 300A Factory default parameter should be changed by supplier to: — 1138 DC-charge current =30A (instead of 60) — 1107 AC-Input max current=12A (instead of 32) INVERTER/CHARGER, RCC-02 control panel Studer XTM +SD +cable (EELEINVTRCC02) RCC-02 control panel for Studer Xtender and VarioTrack devices. Provided with SD card & 2m. bus cable. The connection between RCC-02 and XTM is a straight RJ45 (8-pin) cable, any straight LAN-cable (cat5) can be used. The RCC-02 can be used remotely (via a structured network cabling) up to a cable length of 300m max. |
Operating temperature range | -20°C to +55°C |
Dimensions | 133x322x466mm (HxWxL) |
Weight | 21.2 kg (XTM 3500-24) |
Installation tools | Use of insulated spanners or wrench is strongly recommended when installing battery banks in general. Short circuits on high-capacity batteries can cause very high currents and heat. |
