Single-phase industrial vacuum with two by-pass motors, designed to vacuum liquids, even if they contain debris and light sludge. The version with a submersible discharge pump an be chosen to continuously vacuum and discharge even from a few metres away. SUCTION UNIT The vacuum is generated by 2 by-pass motors. Each motor is managed by an independent switch, permitting the operator to control the intake performance. The motors are located in a sturdy casing, with an insulating sponge to maintain a low noise level. WET & DRY FILTER KIT The vacuum cleaners from the WD range are suitable for the vacuuming and separation of liquids or dust. Two types of filter are available: a polypropylene one to filter and separate any solid materials eventually present in the vacuumed liquids, and a polyester one to be used when vacuuming dust. Both filters are washable. DISCHARGE SYSTEM Discharge happens by gravity. At the bottom of the machine is installed a valve which ensures easy discharge of the liquids and particles collected inside the bin.
Технические характеристики
CharacteristicsDomainindustrialSubstance vacuumedwet and dryPower sourcesingle-phaseNumber of motors2-motorConfigurationmobileApplicationsfor grinding/sanding/polishing machinesOther characteristicscompactPower
2,600 W (8,871.6 BTU/h)
Capacity
130 l (34.3 gal)
Air flow
390 m³/h (13,772.7 ft³/h)
Vacuum
250 mbar (4 psi)
Noise level
72 dB
Weight
38 kg (83.78 lb)
Height
1,160 mm (45.7 in)
Length
580 mm (22.8 in)
Width
530 mm (20.9 in)
