The dry dust extractors of the ESTMAC D series are suitable as a compact and affordable extraction solution for the lower to medium performance segment. The units extract dry and pourable dusts and offer a wide range of applications for many sectors: the stationary dust extractors can be connected directly to sanding blocks, saws or extraction tables for single as well as for multi-station extraction, and combined with an extraction arm for selective dust collection. Thanks to their compact dimensions, the ESTMAC D dry dust extractors can be flexibly installed in changing locations. They are equipped with cleanable permanent filter cartridges of dust class ‘M’, which correspond to a particle separation efficiency of 99.9%. The integrated pre-separator additionally extends the service life of the filter cartridges: it separates out coarse dirt and particles from the air intake in advance. it separates out coarse dirt and particles in advance from the air intake. This reduces the exposure of the filters, which only have to filter out the finer dust. The mobile dust collection container can be used to dispose of the dirt easily and with little dust. The fan unit is flow-optimised and of soundproof design. This ensures a low operating noise.
Технические характеристики
CharacteristicsDomainindustrialType drySubstance vacuumedhazardous dustPower sourceelectricNumber of motors1-motorContainer typesteel, stainless steelConfigurationstationary, low-noiseApplicationsmetal machiningOther characteristicswith HEPA filter, compactPower
1.1 kW, 2.2 kW
Capacity
40 l (10.6 gal)
Air flow
1,500 m³/h, 1,800 m³/h (52,972 ft³/h)
Vacuum
2,040 Pa, 2,650 Pa (0 psi)
Noise level
71 dB, 73 dB
Weight
170 kg, 180 kg (374.79 lb)
Height
710 mm (28 in)
Length
850 mm (33.5 in)
Width
1,490 mm (58.7 in)
