Description
- Freeze Drying Process:
Loading → Primary Freezing → 1st Drying Process → 2nd Drying
Sublimation process - Manual Control:
Make input of condition and parameter for the process from Freeze
to 1st/2nd Drying Process. Process is finished after checking the completion
of drying. - Automatic Control:
Select recipe. Parameters of Pre-Freeze ~1st/2nd Drying process are
automatically set up. Process is completed by the P-rise test system
inside of the chamber after the whole process is finished.
Drying Chamber
1. Cooling speed: -40℃ to 40℃
2. Shelf temperature uniformity: less than ±1.5℃
3. Vessel pressure standard: Qualified chamber under vacuum gauge
pressure lower than 5 x10-3 Torr
Cold Trap Chamber, Condenser:
1. Cooling speed: within 30 minutes from 20℃ to -70℃
2. Defrosting System
Hot gas solenoid method. Fast defrosting by steam and hot water.
Removing ice in less than 30 minutes.
Vacuum System:
– Pull down time: Within 45 minutes from 760Torr to 100mTorr. Lower than 20mTorr eventually.
• All in one type, available at small space
• Pilot scale condenser capacity: 3 liters/batch
• 0.2㎡ various shelf area and distance (standard: 70mm)
• Selectable shelf application (Bulk or Vial stoppering)
