Pipe Cleaning and Pipe Renewal Winch Line 2000 2000-3000 daN Pulling force The hydraulic pump is equipped with a special adjuster. By this it is guaranteed that the adjusted speed is always kept constant. The pulling speed may be regulated by a hand wheel continuously from 0 to max. Furthermore the pulling force is adjustable by a hand wheel as well from 0 to max. When the pre-selected pulling force is reached the hydraulic pump is regulating to “Zero-supply” and the winch operation is stopping whereas the pulling force is staying constant (pre-tension-system). Amongst others Thaler Pipe Renewal Winches are used for Pipe Cracking, Pipe Cleaning, Pipe Relining and in combi- nation with a Swagelining unit. They are constructed under strict compliance with the machine guidelines of the European Community and with their chassis approved by TÜV (Technical Surveyance Authorities) they are admitted to the public traffic. Standard equipment • — Double capstan system, both capstan heads are driven • — No chains between hydraulic engine and capstan system • — Hydrostatic drive • — Petrol or diesel engine • — 500 m usable rope length, smaller or bigger rope lengths upon request • — Drum capacity for bigger rope lengths: o — — KE-SP 2020, with 2.000 kg pulling force and an max. rope length up to 1500 m, Dia. = 8,0 mm — KE-SP 2030, with 3.000 kg pulling force and an max. rope length up to 1000 m, Dia. = 9,5 mm o — Automatic rope guidance to the drum o — Pre-tension-system o — Pulling force control by electronic measuring system with USB port and stick — SYSTEM TM 3000
Технические характеристики
CharacteristicsOperationhydraulicTypewire ropeApplicationpulling, traction, pipe renewalProducts applicationsfor trailersCapacity
Min.: 2,000 kg (4,409.2 lb)
Max.: 20,000 kg (44,092.5 lb)
Cable diameter
Min.: 8 mm (0.31 in)
Max.: 22 mm (0.87 in)
Cable length
Min.: 1,000 m (328010)
Max.: 2,200 m (721710)
