Additional Features:
- Frequency Range: 0.15 MHz — 500 MHz.
- 4 Digit Display (Center & Marker Frequency, 0.15 MHz resolution)
- Amplitude Range: –100 to +13dBm
- Filters: 20 kHz, 250 kHz and Video Filter
- Tracking Generator
- Output Power: +1dBm to –50dBm (50W)
The HM5006 Spectrum Analyzer is the ideal instrument for analyzing any kind of signal within the frequency range of 0.15 to 500 MHz. The HM5006 includes a Scanwidth Selector that can adjust the frequency display width from 50 kHz to 50 MHz per division. The analyzer can measure low amplitude signals and has a measurement range of over 113dB. Including switchable attenuators, a range of -100dBm to +13dBm can be measured with 80dB being displayed on the screen at 10dB/division. In «Zero Scan Mode» selective amplitude level measurements can be performed, while tuned to a fixed frequency.
The HM5006 includes a 4 digit numeric LED readout that can selectively display either the Center or Marker Frequency. Frequency measurement is accomplished by adjusting a needle-like cursor to the point of interest on the display and reading the 4 digit Marker Frequency value. The model HM5006 also includes a Tracking Generator that permits a two port measurement that is useful in network and filter passband analysis. The Tracking Generator is a frequency synchronous signal source with a range of 150 kHz to 500 MHz that is controlled by the frequency of the spectrum analyzer. The output level is adjustable from –50dBm to +1dBm in four 10dB switchable steps in addition to an 11dB rotary variable attenuator control.
Технические характеристики
| Manufacturer | Hameg |
|---|---|
| Condition | Used |
| Frequency | 500 MHz |
