Motor Driven pump for oil lubrication systems This oil gear pump is an oil control unit with a 3 l reservoir. It is comprised of a gear pump which sucks the lubricant from reservoir bottom (oil). After the pump, there is also a safety by-pass valve and a pressure gauge. The system is completed with a minimum level contact, a cap for reservoir filling and a 1/4 BSP inlet. The pump motor is single phase. This pump is equipped with an automatic system that stops operation in the absence of lubricant in the reservoir. APPLICATION Oil re-circulation is used extensively in the power industry and pulp and paper industry allowing for increases in operating speed and performance thanks to the fast change-over of lubricant that removes heat and provides full-oil immersion lubrication. Key Features: — Max working pressure: 10 bar — Flow rate: 0.35 l/min.7 — By-pass setting: 6 bar — Lubricants: Oil 32÷1000 cSt — Working temperature: +5°C ÷ +60°C — Reservoir: 3 l — Motor: 1PH-230V-50HZ-0.09kW-4poli-GR56
Технические характеристики
CharacteristicsFluidoilOperationwith electric motorPrimingsubmersibleTechnologygearMobilitystationaryDomainindustrial, for the paper industryApplicationsrecirculation, for lubrication systemsOther characteristicsautomatic, with tankFlow
0.35 l/min (0.09246 us gal/min)
Pressure
10 bar (145.038 psi)
Power
0.09 kW (0.12 hp)
Weight
6.8 kg (14.99 lb)
