Product Description The BTU Gas Analyzer GC system is preplumbed and ready to measure N2 methane CO2 ethane H2O propane iso- and normal butanes iso- and normal pentanes and C6 plus backflush. The main benefits of the SRI BTU Gas Analyzer system aresimplicity low cost and the ability to determine the water content of the gas. The SRI BTU Gas Analyzer uses just a single 10 port gas sampling valve and two columns and is tolerant of valve timing variations or operator adjustments. Unlike the widely used competitive micro GCs the SRI BTU GasAnalyzer GC system is not only tolerant of water in the sample gas but it actually generates a quantifiable water peak. The seven minute analysis may be longer than a micro GC analysis but the BTU GC does not need baking out between runs. Therefore about the same number of runs may be made per day with the BTU GC as with a typical micro GC. The BTU Gas Analyzer can be configured with a TCD detector only for detection limits in the 200-500ppm range. Other detectors can be added such as the HID FID or FPD for applications requiring higher sensitivity or selectivity.







