Флэш-пламенный фотометр BWB Technologies

Product Description The next generation of flame photometers Cost Effective, accurate, and reliable Long term savings Fast Results Other Models: Bio, Sugar, Wine, Nuclear, AFHS, Lithium Up to 4 channels of simultaneous detection & display The BWB Flash Flame Photometer Exclusively From GMI! Our award winning 4-channel instrument! Ready to use straight out of the box Just add gas! Not sure what model is right for you? Download the Product Comparison sheet below! Download Product Comparison Sheet #image_266054274 { width: 91%, } The future of flame photometry has arrived! The Flash BWB Flame Photometer mini product line was created in January 2018 to answer the request from global distributors and users for a lower cost version of the Highly Acclaimed BWB XP that has dominated the Flame Photometry market since 2007. These new models feature the identical inbuilt custom designed air compressor (rated for thousands of hours of trouble free service), the expandable Menu structure for units of measure, and the customer benefit of the Just Add Gas philosophy for simplified ordering and start up. These are the same benefits as our premium line of XP Flame Photometers, just with a slightly restricted Options list and fewer Laboratory and Fluids kit items. Features: On board Level Sensor for drain cup alert Intuitive user interface for true ease of use Display prompts step by step operation Built-in Air Compressor Solutions and labware included 6 User selectable units of measure: PPM, MG/L, MEQ/L, %, MG/KG, MMOL/L 1-Year factory warranty included Extended 5-Year Warranty Available Technical Data: Sample rate 2 3.5ml/min Tubing materials Silicone and Tygon Required desk space for Instrument 50cm (H) x 45cm (W) x 45cm (D)* For Safety reasons the Flame photometer requires 1m of unobstructed space above to allow dissipation of heat from the chimney. Instrument size XP Flame Photometer 51cm (H) x 38cm (W) x 41cm (D) (20in x 14in x 16in) Shipping 62cm (H) x 55cm (W) x 47cm (D) (24in x 22in x 19in) Weight Flash Flame Photometer 15.3kg (33.7lbs) Shipping 22kg (48.5 lbs) Optimal range: Single point calibration Na 0.1 60ppm K 0.05 100ppm Li 0.05 30ppm Ca 1.0 100ppm Multi Point Calibration Na 0.1 1000ppm K 0.05 1000ppm Li 0.05 1000ppm Ca 1.0 1000ppm Reproducibility &lt,1% Coefficient of variability for 20 consecutive samples over ten minutes at concentrations of 100ppm or less. (After instrument stabilisation). Specificity Na/K/Li = &lt,0.5% to each other when equal in concentration at &lt,100ppm Limit of detection (LOD) and limit of quantification (LOQ) LOD LOQ Na 0.03ppm Na 0.1ppm K 0.02ppm K 0.05ppm Li 0.02ppm Li 0.05ppm Ca 0.3ppm Ca 1ppm Time to stability Less than 15 seconds after sample is introduced into the flame. Ions measured Simultaneous measurement of Na, K, Li, Ca Interfaces USB 0-2.5 volt output (based on sample concentration linked to element of users choice) Optional 4-20mA output in place of the above Optional integrated printer .csv and .pdf generated reports and files via FP-PC software Recommended minimum warm up time based on ambient temperature 21C 40 minutes Power requirements 100V 250V AC at 50 or 60Hz automatically selecting Fuel requirement Propane, Butane or Natural Gas* regulated to 19Bar. Flow rate of 0.4l/min *with modifications. BWB Technologies recommends either Propane or Butane for optimum results. Readout LCD, four line, alpha numeric, back lit. More Information: The design criteria for this new 2018 line was to provide a modernized replacement flame photometer for the hundreds of units in service in the USA and Canada that are now decades old. These older units have no replacement parts and no servicing is currently available. These are Perkin Elmer, Jenway Instruments, Corning and Sherwood Instruments units as well as the units supplied by Cole Parmer, VWR and Fisher Scientific. When the costs of adding the extra components that are required to operate the flame photometers sold by our competition are totalled up, (calibration solutions, diluent solutions, various user replacement optional detection filters, optional software that ties to computers, AND the big cost, the required Air Compressor) the benefit of simplicity and cost savings of the Just Add Gas only one order number needed we provide is apparent. Simple to order, simple to use, minimal table top space required, Major Power in simple software as standard (FP-PC), the new FLASH is another exciting offering from BWB Technologies USA. For new emerging markets: aqua farming, flow injection analyses, educational markets as well as the Replacement Flame Photometer marketplace in the USA. #image_643764136 { width: 66%, }

Технические характеристики