> The new MAG-VIEWTM series flow meters offer a high quality, economic and solid state solution for measuring flow in areas where flow sensors with moving parts cannot be applied. Its interference free operation, combined with a long-life cycle and the wide independence to the inlet and outlet pipes makes MAG-VIEW the perfect solution even in compact machines with cramped confines. The meter is intended for continuously measuring of flow rates or for dosing / batching of electrically conductive liquids with a minimum conductivity of 50 µS/cm > MAG-VIEW series The MAG-VIEW series operate on magnetic inductive principle. The measuring pipe is in a magnetic field (B). If an electrically conductive medium (Q) passes through the measuring pipe and thus right-angled to the magnetic field, a voltage (U) will be induced into the medium which is proportional to the average flow velocity and picked up by the two electrodes. Features of magnetic flow meter Makes liquid flows visible by Pulse output Analog output (4..20 mA) Blinking LED (red/green) No mechanical wear No moving parts Ease of mounting and operation Mounting in any position Free pipe cross section No additional pressure drop Fast response (
Технические характеристики
CharacteristicsTechnologyelectromagneticFluidfor liquids, for waterInstallationin-lineMaterialstainless steel, aluminumCommunication4-20 mA, analog output, with pulse outputProtection levelIP65Applicationsfor low flow rates, for water treatment, for the food industry, for dosing, for the beverage industry, for district heating networksOther characteristicscompact, high-accuracyVolumetric flow rate
Max.: 30 l/min (7.9 us gal/min)
Min.: 0.1 l/min (0 us gal/min)
Process temperature
Max.: 90 °C (194 °F)
Min.: -20 °C (-4 °F)
Process pressure
16 bar (232.06 psi)
Repeatibility
1 %
