DLR50-15-150 Электронная нагрузка постоянного тока Dynaload

DLR50-15-150 представляет собой электронную нагрузку постоянного тока мощностью 150 Вт от Dynaload. Моделируйте нагрузку на электронную схему, включая тестирование источников питания, приложения ATE, тестирование светодиодов и многое другое.

Доставка импортных компонентов по России от 3х недель транспортными компаниями СДЭК, Деловые Линии, Major Express.

Оплата физическими и юридическими лицами безналичным расчетом.

Цена может измениться после запроса у поставщика!

Артикул: DLR50-15-150 Dynaload DC Electronic Load TME арт.: DLR50-15-150 Dynaload DC Electronic Load

Источники питания и нагрузки

Additional Features:

Voltage: 50V
Current: 15A
Power: 150W
Overload Rating: 10%
Voltmeter ranges: 0-6V, 0-18V, 0-60V
Ammeter ranges: 0-1.8A, 0-6A, 0-18A
Resistance ranges: 0-.5A/V, 0-3A/V
Constant Current Ranges: 0-3A, 0-15A
Program Input: 0-6V @ 1mA
Program Linearity: Less than ±1% from 10% full load
Response Time: Less than 50 u sec
Constant voltage: 0-50V
Meter Accuracy: Less than ±3%
Overvoltage: 60V Max
Current Limit: 20A Max
Power Limit: 200W Max
AC Input: 115 VAC ±10%, 47-63 Hz
DC Input Terminals: Input terminals are located for convenience on both front and rear panels of most models
Twin Load Adjusts: Both fine and coarse load controls for greater resolution. Single load control
Voltmeter: Three-range voltmeter is provided for monitoring input levels
Ammeter: Three-range ammeter for visual measurement of current. Each range is accurate to ±3%
Amps per Volt ranges: The two ranges on manually controlled units represent resistive loading
Constant Current: This mode is used to produce a constant load on any variable source. Typical current regulation is ±1%, with less than .1% RMS ripple current. This mode is excellent when using a Dynaload as a current regulator.
Constant Voltage: Constant voltage regulation can be used for a variety of applications, such as battery simulation, voltage limiter, or shunt regulator
External programming: Terminal input is located on the rear panel for external modulation
Protection: Overcurrent, overpower, overvoltage, and reverse polarity

The Dynaload DLR50-15-150 is designed for economy and versatility. This standard unit offers the basic load functions of resistive loading and constant current loading. Constant voltage is also provided for battery simulation. Remote programming inputs are located on the rear panel for easy connection of a 0-6V @ 1mA dc program signal or waveform.

Технические характеристики

Manufacturer	Dynaload
Condition	Used
Current	15 A
Type	Single
Voltage	50 V
Power	150 W