Gear motor with worm screw and standard motor Ø 63 12 or 24 Vdc 3300 RPM loadness 110W. Starting corrent: see table I max. Driving shaft mounted with on 2 ball bearings Output shaft supported by two ball bearing with oil splash guard on output side. Connecting 2 wire 0,75 x 200 mm. *The rotation speed can change of ±10%. The S1 load test was made using a (4,5 A) current in the air with an increase of temperature of 70°. The S2 test was made using (9 A) current in the air with a 50% timing 5’ with an increase of temperature of 80° max. The starting current is I max and cannot be maintained for more than 2′. Max forces wich may act on shaft Axial 250 N, Radial 400 N. It is possible to apply an encoder.
Технические характеристики
CharacteristicsMotor typeDCTypewormShaft orientationright anglePower100 W…500 WVoltage 12 V, 24 VTorque10 — 20 Nm, 1 — 5 Nm, 5 — 10 NmProduct applicationsindustrialOther characteristicscompact
